Tunnelstuff in Norway

Intlwaters

Help Support Intlwaters:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
I had to make a new interface plate for the VP drive. Zenoah bolt patern did not match my requirements, easy job though 😎
Looking ok so far.
 

Attachments

  • F5EC4D06-218C-4C3D-83D8-9580B0F3C563.jpeg
    F5EC4D06-218C-4C3D-83D8-9580B0F3C563.jpeg
    1 MB · Views: 1
  • C8C25896-87E7-4A75-A156-1490A011EDF9.jpeg
    C8C25896-87E7-4A75-A156-1490A011EDF9.jpeg
    1.6 MB · Views: 1
  • 1234E34C-220B-4B30-908A-F5D2CDCE1F76.jpeg
    1234E34C-220B-4B30-908A-F5D2CDCE1F76.jpeg
    2.6 MB · Views: 1
Would there be any need for adapters from K&B 3,5 to OS 3,5 interface?
Or adapters for K&B 7,5 to larger electric motors with 30x6 and 35x6 bolt pattern?
 

Attachments

  • F50BF783-9D2C-4A6E-8237-5BDC86F7AA21.jpeg
    F50BF783-9D2C-4A6E-8237-5BDC86F7AA21.jpeg
    619.8 KB · Views: 0
  • 45A9C5C8-CBDE-4C9A-9AC0-F9E3300EE71C.jpeg
    45A9C5C8-CBDE-4C9A-9AC0-F9E3300EE71C.jpeg
    637 KB · Views: 0
  • 222FDF99-CA63-4EA0-830A-D7A84BFD2296.jpeg
    222FDF99-CA63-4EA0-830A-D7A84BFD2296.jpeg
    790.1 KB · Views: 0
  • EFE53606-9D43-4642-A0AC-0E33A067C7D3.jpeg
    EFE53606-9D43-4642-A0AC-0E33A067C7D3.jpeg
    712.9 KB · Views: 0
  • 52BEFCF1-EE09-4454-8B0C-18445846E368.jpeg
    52BEFCF1-EE09-4454-8B0C-18445846E368.jpeg
    868.8 KB · Views: 0
Think it´s interesting with other options than K&B/Lawless.
Good for the sport with another choice
I would love to get one
:):)
 
Last edited:
So I finally received the Lawless drive 👍
I was a little delayed with the adapter as a couple of Australien dudes tricked me into making a jackplate for the drive… Must have been in a really low place that day as I’m normally not that easily fooled 🙄
Got the baseplate done for the Lawless, and this is pretty much what it’s gonna look like.
 

Attachments

  • 1D11B6FB-DCC6-4AF0-AD80-0FBB4B3A6747.jpeg
    1D11B6FB-DCC6-4AF0-AD80-0FBB4B3A6747.jpeg
    1.2 MB · Views: 1
  • 2910CEFA-53A3-4A38-A0D0-D904727D9ECD.jpeg
    2910CEFA-53A3-4A38-A0D0-D904727D9ECD.jpeg
    1,022.4 KB · Views: 1
  • FCE680D1-8370-4A79-B689-4FA0C9D405C6.jpeg
    FCE680D1-8370-4A79-B689-4FA0C9D405C6.jpeg
    515.8 KB · Views: 0
  • 83D20F35-EE1D-4539-86B8-3D61FC257EDA.jpeg
    83D20F35-EE1D-4539-86B8-3D61FC257EDA.jpeg
    480.8 KB · Views: 0
  • 976996CD-ADC7-4487-8695-5685A505910A.jpeg
    976996CD-ADC7-4487-8695-5685A505910A.jpeg
    772 KB · Views: 0
  • 1428577B-F2EB-4123-9925-260FB35E6FA2.jpeg
    1428577B-F2EB-4123-9925-260FB35E6FA2.jpeg
    918.5 KB · Views: 0
  • F656F842-4411-46DF-8AB9-8245B230B6A3.jpeg
    F656F842-4411-46DF-8AB9-8245B230B6A3.jpeg
    572.1 KB · Views: 1
  • 66AEBB55-04CE-4682-8BE7-85C2990F7591.jpeg
    66AEBB55-04CE-4682-8BE7-85C2990F7591.jpeg
    712.1 KB · Views: 1
  • C0014470-FBFE-4817-8F1F-A3C79A98CDBC.jpeg
    C0014470-FBFE-4817-8F1F-A3C79A98CDBC.jpeg
    1.1 MB · Views: 1
  • 1185C25C-3D44-403E-8211-E872D4418612.jpeg
    1185C25C-3D44-403E-8211-E872D4418612.jpeg
    970.6 KB · Views: 0
So I finally received the Lawless drive 👍
I was a little delayed with the adapter as a couple of Australien dudes tricked me into making a jackplate for the drive… Must have been in a really low place that day as I’m normally not that easily fooled 🙄
Got the baseplate done for the Lawless, and this is pretty much what it’s gonna look like.
That’s a nice looking mount! That’s a big problem we’ve had with the gas lowers is that the mounts wear out quickly due to the weight and vibration from the large gas engines, leading to a lot of slop and eventually causes handling issues.
 
Back
Top