• If you have bought, sold or gained information from our Classifieds, please donate to Int'l Waters and give back.

    You can become a Supporting Member which comes with a decal or just click here to donate.

Sold ML Boatworks GSX480 Gas Sport Hydroplane

Intlwaters

Help Support Intlwaters:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Chris Kurtz

Well-Known Member
Joined
Nov 15, 2020
Messages
102
ML Boatworks GSX480 Gas Sport Hydroplane.
Low run time, maybe 12 or 15 runs. No racing or competition just playing around on the river.

I touched up the yellow paint and it is ready for clear coating. I just don’t have time to finish the boat as I am moving.

Asking $350 for the bare wood hull with no hardware

$500 with all hardware minus the engine

$1100 with like new Gizmo 30+cc full modified engine with billet crankcase and hot pipe combo with 8 different tuning sections for different conditions, props, etc.

Specs here: https://www.gizmomotors.com/online-s...zr-zenoah-30cc

Servo’s, and everything needed to run other than the receiver and a battery pack.
Will include a prop also.

Prices not including shipping.
Shipping probably around $100
Located in Stanfield, Oregon 97875
[email protected]
 

Attachments

  • 20220718_180522.jpg
    20220718_180522.jpg
    4.3 MB · Views: 1
  • 20220718_180537.jpg
    20220718_180537.jpg
    3.9 MB · Views: 1
  • 20220718_180555.jpg
    20220718_180555.jpg
    4.2 MB · Views: 0
  • 20220718_180657.jpg
    20220718_180657.jpg
    3.4 MB · Views: 0
  • 20220718_180842.jpg
    20220718_180842.jpg
    4.2 MB · Views: 0
  • 20220718_181257.jpg
    20220718_181257.jpg
    3.1 MB · Views: 0
  • 20220718_181719.jpg
    20220718_181719.jpg
    4.6 MB · Views: 1
  • 20220718_181725.jpg
    20220718_181725.jpg
    5 MB · Views: 0
  • 20220718_181730.jpg
    20220718_181730.jpg
    4.1 MB · Views: 0
  • 20220718_181747.jpg
    20220718_181747.jpg
    3.9 MB · Views: 0
Hello Chris, beautiful boat. I’ve been thinking to get a gas race boat and I’m very interested in yours. What clear coat did you use and do you have it still ? What do you think the cost to ship it to the Bay Area ca would be for the hull and hardware ?
Thanks ! Greg
 
I used an automotive acrylic urethane clear coat.
I just I just packaged it and weighed it, it would cost around a $150 to ship.
 
OK OK no problem it may have sold anyway, someone is interested in it right now.
Just waiting on the funding.
 
ML Boatworks GSX480 Gas Sport Hydroplane.
Low run time, maybe 12 or 15 runs. No racing or competition just playing around on the river.

I touched up the yellow paint and it is ready for clear coating. I just don’t have time to finish the boat as I am moving.

Asking $350 for the bare wood hull with no hardware

$500 with all hardware minus the engine

$1100 with like new Gizmo 30+cc full modified engine with billet crankcase and hot pipe combo with 8 different tuning sections for different conditions, props, etc.

Specs here: https://www.gizmomotors.com/online-s...zr-zenoah-30cc

Servo’s, and everything needed to run other than the receiver and a battery pack.
Will include a prop also.

Prices not including shipping.
Shipping probably around $100
Located in Stanfield, Oregon 97875
[email protected]
Nice
 
Back
Top