Parts Wanted Collets

jim kapanowski · Jul 4, 2022

I am looking for good collets for 21 CMB
I have a few from different sellers and they are a pain !
Some are not shallow enough
Others are not sized correct for the 3 1/16 shafts that destroy the shafts.

SayMikey · Jul 4, 2022

Speedmaster

Samuel Hagan JR · Jul 4, 2022

The octura collet works great.

jim kapanowski · Jul 4, 2022

Samuel Hagan JR said:
The octura collet works great.

Yes I have one of those a bit large but lock in nicely

dave roach · Jul 4, 2022

Try Allen Hobbs.That is were i get mine and they are great.

Dave

brad nichols · Jul 5, 2022

Al Hobbs has some very good collets

Brad

Al Hobbs · Jul 5, 2022

A/A collets for 1/4 X 28 thread and 3/16' cable are $23.00 each delivered in the USA.

They are made in the USA of stainless steel and brass.

If you think the collet on the engine has too much run out, loosen the cable nut and turn the flywheel 180 degrees, then tighten the cable nut and check run out again. Do the sqme thing over again moving the flywheel 90 degrees and retest. You will find that when you find the best flywheel position, there will be no run out from the cable collet.

Al Hobbs

Al Hobbs · Jul 6, 2022

I should have added that the flywheel should be turned 180 degrees and later 90 degrees on the brass collet as well as the crankshaft.

Mark Anderson · Jul 6, 2022

Been using Al's collets for a while. Nice parts from a great ambasador of our hobby.

Al Hobbs · Jul 6, 2022

Mark Anderson said:
Been using Al's collets for a while. Nice parts from a great ambasador of our hobby.

Thank you for the kind words.

If you have bought, sold or gained information from our Classifieds, please donate to Int'l Waters and give back.

Parts Wanted Collets

Help Support Intlwaters:

jim kapanowski

Well-Known Member

SayMikey

Well-Known Member

Samuel Hagan JR

Well-Known Member

jim kapanowski

Well-Known Member

dave roach

Well-Known Member

brad nichols

Well-Known Member

Al Hobbs

Legend of the NW

Al Hobbs

Legend of the NW

Mark Anderson

Well-Known Member

Al Hobbs

Legend of the NW

Similar threads

Latest posts

If you have bought, sold or gained information from our Classifieds, please donate to Int'l Waters and give back.

Parts Wanted Collets

Help Support Intlwaters:

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Legend of the NW

Legend of the NW

Well-Known Member

Legend of the NW

Similar threads

Join the conversation!

Join today and get all the highlights of this community direct to your inbox. It's FREE!