What type of steel to use for stub shafts and wire drives?

Intlwaters

Help Support Intlwaters:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Troy Hammons

Well-Known Member
Joined
Oct 31, 2011
Messages
64
Looking for some insight on what to use for stub shafts and wire drives. There are lots of choices out there. I have had issues in the past couple years with some stub shafts breaking or bending. It seems one manufacturer had too brittle of material, and another was too soft. I'm looking for something in between. I don't know if there is something pre heat treated that is strong enough? I was looking at a few grades of tool steel in the annealed state. Let me know what you guys think.
 
Troy,
Save yourself the effort of building your own and call up Brent Byers. He has .098 wire to 3/16" stubs and also has .125" wire to 3/16" stubs. When I made my own I was using 316 SS precision ground blanks from McMaster or 12L14 blanks. The spring steel wire I had to source from Germany.
 

Attachments

  • Wire drive stubs 2.jpg
    Wire drive stubs 2.jpg
    876.4 KB · Views: 0
I have for .078 wire. I would think it might hold for the larger stuff. It is pretty tough stuff.
Mike
 
Thanks Tyler, I've been using his wire drives for a while and they work great. I want to make some square drive stub shafts to try.
 
Back
Top