• If you have bought, sold or gained information from our Classifieds, please donate to Int'l Waters and give back.

    You can become a Supporting Member which comes with a decal or just click here to donate.

Parts For Sale Os max 21 vz and a os max 21 xz

Intlwaters

Help Support Intlwaters:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
I wouldn't mind having it for the spare parts, no matter the condition, as long as the crank is useable..
Anything you need we could possibly trade for?
It's an rx. Case is corroded. It would clean up. (Still look like a used eng. I can see the crank thru intake. Crank still has its black oxide on it. Trade? That might work.
 

Attachments

  • 20220429_011101.jpg
    20220429_011101.jpg
    1.8 MB · Views: 41
  • 20220429_011045.jpg
    20220429_011045.jpg
    1.4 MB · Views: 46
don't know if a RX crank will work... I doubt it.
EX's are pretty old motors...

can you pull out the crank and take a picture of it? and possibly measure the bearing surfaces? I don't have a crank to compare it to...but with a few measurements it might fit.
 
Bill, my offer still stands of $300.00, shipped for both motors and parts.

Thanks,
Steve
 
Steve. Don't mean to ignore you. But I found more parts. And both motors have compassion and good bearings.think I'll use them. Got miss vegas converted to 21 and a rigger. Sorry!
Bill find you a 20j or a carburetor off ebay there is a few for some of the os max 40 size engines as well that will work. you wont regret it. they will run perfect with a different carburetor. I put a knb 3.5 in my vegas with a stainless plate and spacers and it has worked great.
 

Attachments

  • 20210715_042936.jpg
    20210715_042936.jpg
    534 KB · Views: 22
  • 20210715_042958.jpg
    20210715_042958.jpg
    425.2 KB · Views: 21
  • 20210715_043016.jpg
    20210715_043016.jpg
    620.9 KB · Views: 19
Bill find you a 20j or a carburetor off ebay there is a few for some of the os max 40 size engines as well that will work. you wont regret it. they will run perfect with a different carburetor. I put a knb 3.5 in my vegas with a stainless plate and spacers and it has worked great.
Try this to help it turn. (If you haven't already) that turn fin up grade and squaring up the inside edge. 1/16 . Will probably continue ride pad fwd past the transion
 
Back
Top