I’M BACK

Steve Seebold · Aug 30, 2019

After 2 years of really crappy health and a move from Southern California to Vancouver Washington, and a new 3 lead pacemaker with a defibrillator I’m finally ready to go back to work.

I can’t figure out how to post pictures here but if you go to Extreme Gas RC Boats International you can see some of the stuff I make.

One thing I make is what was formerly known as the Ron Buck Super Stinger. That Stinger was always made my me and sold by Ron on another boating site because I couldn’t get on there for almost 10 years.

julianconde · Aug 30, 2019

do you have those stingers drives in 3/16th shaft ??

Steve Seebold · Aug 31, 2019

No I don’t, but I’ve never been asked about a 3/16 size. I’ll look into it.

Alan Elzer · Aug 31, 2019

Steve think your Fb account been hacked. Got a message from you about free money.... (Nothing is free) about a week ago. Also what's your email ?

Steve Seebold · Aug 31, 2019

Email:
[email protected]

JRXHydros · Sep 2, 2019

You need to start making nitro hardware Steve Seebold,display with pictures & the ball will start rolling for you.

FloridaScaleBoater · Sep 2, 2019

I'm with Joel above.
Good hardware both Nitro & Gas is always welcome.

Steve, what are you asking for the prop balancer

Steve Seebold · Sep 2, 2019

Prop balancer is $85.00 shipped.

Thomas Hulbert · Sep 3, 2019

FloridaScaleBoater said:
I'm with Joel above.
Good hardware both Nitro & Gas is always welcome.

My 2 cents over dealings with Steve in the past on him selling hardware.
As long as you get what you pay for and do not get burned by the seller. He has left a real bad taste in many a boaters mouths with bad service and constant delays on on getting product out or returning money

Will take money fast and take forever to deliver parts.

Been there had it happen. He was asked about delays and was bs about machine moves and other contracts .

BEWARE

Steve Seebold · Sep 7, 2019

Tom Hulbert is right. I took his money once and always had an excuse why I wasn’t making his parts. I finally refunded his money “AND” I sent him $850.00 worth of hardware FOR FREE, but he forgot to mention that.

Granted, I was trying to make an aerospace machine shop go and my boat parts business was just getting in the way.

I don’t do aerospace machining any more.

For about the last 8 years I have pretty much concentrated on gas powered RC boat stuff.

I did go through a period a couple of years ago where I had some pretty serious cardiac health issues, but with the addition of a 3 lead pacemaker/defibrillator all that is now behind me.

I have recently moved from Southern California to Vancouver Washington and I am in the process of setting up my shop again. I’ve even made a commitment to buy another milling machine.

I have a new out drive on the drawing board that will be more size specific for the boats with the big inline twin engines. And yes, they will be for 5/16 prop shaft.

julianconde · Sep 7, 2019

Steve Seebold said:
Tom Hulbert is right. I took his money once and always had an excuse why I wasn’t making his parts. I finally refunded his money “AND” I sent him $850.00 worth of hardware FOR FREE, but he forgot to mention that.

Granted, I was trying to make an aerospace machine shop go and my boat parts business was just getting in the way.

I don’t do aerospace machining any more.

For about the last 8 years I have pretty much concentrated on gas powered RC boat stuff.

I did go through a period a couple of years ago where I had some pretty serious cardiac health issues, but with the addition of a 3 lead pacemaker/defibrillator all that is now behind me.

I have recently moved from Southern California to Vancouver Washington and I am in the process of setting up my shop again. I’ve even made a commitment to buy another milling machine.

I have a new out drive on the drawing board that will be more size specific for the boats with the big inline twin engines. And yes, they will be for 5/16 prop shaft.

Glad you are doing better let’s let the past be the past and let’s move forward and make some
Nitro hardware

aaron alberico · Sep 8, 2019

Steve,
After one off your prop balancer with 1/4 & 3-1/6 shafts have you got any?

Thanks

Steve Seebold · Sep 8, 2019

Aaron, I have 1/4 and 3/16 shafts, but at this time, I don’t have any balancers. In all honesty, balancers are probably 2 to 3 months out.

Karl loveless · Sep 17, 2019

Steve, when you have a balancer with 1/4 and 3/16 Shafts ready to sell please let me know. Thanks.

Steve Seebold · Nov 6, 2019

I’ll be all set up to start making parts again by the end of next week. My plan right now is to make some dual pickup rudder standoffs and some dual pickup rudders.

brad nichols · Nov 6, 2019

Would be great electric, gassers and twins!

Brad

Steve Seebold · Nov 7, 2019

brad nichols said:
Would be great electric, gassers and twins!

Brad

Steve Seebold · Nov 7, 2019

I put this same post up on another site last night and someone over there took it down.

FloridaScaleBoater · Nov 7, 2019

Steve Seebold said:
I put this same post up on another site last night and someone over there took it down.

Was it over on Jim's RC Boat Dock?

Richard Hartley · Nov 7, 2019

Sent you an email Steve
hope to hear from you soon
Richard

I’M BACK

Help Support Intlwaters:

Well-Known Member

Attachments

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Similar threads

Join the conversation!

Join today and get all the highlights of this community direct to your inbox. It's FREE!