1/8 scale stands

Shop deals on ebay
shop deals on amazon
Advertise with us
Intlwaters

Help Support Intlwaters:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Most people make there own as not many hulls have the same bottom shape and commercially made stand usually don't fit properly nor are they economically freezable to make one offs and can cause more hull damage then there worth.
 
Last edited:
I was kind of thinking the same thing as Tom. I know my builds don't have the same bottom profile as what Mike has in his kits or, for that matter, even what is shown on the plan sheets drawn by Roger Newton. It's not really that difficult to build a stand. The hardest part is to match the bottom profile. That can be taken care of with a straight edge with parallel sides. In two minutes, I can have the sides of a stand laid out and ready to cut
 
I make sstands for others but would need a drawing of the hull bottom and shipping could be expensive . You should get in contact withsomeone in your local club to see if they could help.

Brad
 
Mike Hughes said:
Yes Home Depot does. You have to put it together yourself. They have all the materials.
Mike
Click to expand...

Not sure if you are being a smart alec or not, lol, but yes I realize you can buy materials to make one but I was trying to find out if there's somewhere online that has pre-made stands.
 

Similar threads

T
Sources for Scale Detail Parts
Replies
2
Views
445
dave weagel
D
ACTION JACKSON
Dayton walthers 1/6 scale
Replies
4
Views
1K
Hydro Junkie
H
ChrisHerzog
Cleaning up the shop!
Replies
17
Views
2K
BobSmith1
BobSmith1
Todd Breda
Looking For Quality 1/8 Scale John Walters Driver
Replies
8
Views
1K
Bradley Maglinger
Bradley Maglinger
Scott Miller
GP Hydroplanes 1/8 Scale
Replies
15
Views
1K
Stephen Roberge
Stephen Roberge

Latest posts

Back
Top