Sport 20 rollcall

Intlwaters

Help Support Intlwaters:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
35170hd.jpg


2njfh0.jpg
 
Jerry,

He didn't. It was sold under the LeeCraft name when Alfred Lanza owned the molds. From what I understand it's an Arno Bert boat modified by Mike Hughes and set by Lanza.
 
Last edited by a moderator:
GdAY David Ashcroft.
Isn't that one you have there a Steve Balanger Hull From QLD here in Australia??
 
Last edited by a moderator:
It’s your old m&m boat I got for my kids and nephew to drive
 

Attachments

  • 55FD0D72-1A08-4D3C-8BA5-FBE53F862DCF.jpeg
    55FD0D72-1A08-4D3C-8BA5-FBE53F862DCF.jpeg
    1.7 MB · Views: 30
Joel. What tanks are you using?
Thanks , I'm using 4oz flex tanks from Sullivan. I heated them and forced them in while hot. Working great so far.
Yes its been in the water several times. Just playing with props. Very happy with it. need a little advise. It's flying down the straights turns great but hops all the way around and loses some speed.
Your thoughts please.
 
When mine was doing that I had to make sure my strut was 100% flat on the table. I run my strut 1" off the table and X440 or M440 prop. If mine had a hair of negative in the strut it would hop.
 
When mine was doing that I had to make sure my strut was 100% flat on the table. I run my strut 1" off the table and X440 or M440 prop. If mine had a hair of negative in the strut it would hop.
I'm running mine like yours at 1" Are you running 2 blade? I tried 440 3 blade not good 337 3 blade was ok so far the best has been an ABC H1515 2 blade screams down the straights falls off in the turns cause of that hopping. Going to try playing with turn fin.
 
Back
Top