- Joined
- Nov 26, 2002
- Messages
- 1,592
I have the Boris meter that runs on a 6 cell 2000 mah nickel metal hydride pack (7.2v) Has anyone run this version meter on a 2s lipo 2100 mah (7.4v) ? Thanks
Boris Mazor flowmeter (voltage)
- Thread starter Ron Zaker Jr
- Start date
Help Support Intlwaters:
HTV Boats
Well-Known Member
- Joined
- Nov 8, 2006
- Messages
- 2,512
Switched mine to a 1000ma 2S lipo a couple years ago. Don't recharge very often at all. Readings seem more consistent. Make the change. More ma will just last longer between charges. I wonder if a 9.9v 3S Life would work as mine was a 7.2v unit also. Maybe Boris will chime in.
Mic
Mic
- Joined
- Nov 26, 2002
- Messages
- 1,592
Thanks Mic,that's cool. I did message Boris about it also. Thanks again.
Rick Pirrone
Well-Known Member
- Joined
- Apr 22, 2011
- Messages
- 427
hi all
i change mine to a 2100 mah life 6.6 volt and noticed the more power the more flow rate so to get the same readings i have allways had boris said i would have to put in a voltage reg i did and havent look back you must wire this after the switch otherwise it will flatten your battery
i change mine to a 2100 mah life 6.6 volt and noticed the more power the more flow rate so to get the same readings i have allways had boris said i would have to put in a voltage reg i did and havent look back you must wire this after the switch otherwise it will flatten your battery
Similar threads
Parts For Sale
Boris Mazor flowmeter and Dynatron electric starter
