ML BOATWORKS LASER CUT 1/10th, 1/8th, GAS Scale Wood Unlimited Hydroplane Framing Kits

Mike Luszcz said:

Glenn, how many frames are affected? I might be able to get you some centered crossmembers cut. I was just finishing up the 171 extreme series kit, and was told by Mike Becke that two versions of the 171 existed. I had the plans for the offset hull. Let me know if you need my help. Mike

Click to expand...

Mike Luszcz said:

ML Boatworks,

Wood laser cut scale unlimited hydroplane framing kits for over 100 different hulls. These are available in 1/10th (clockwise and counterclockwise), 1/8th, Gas as base sizes and any other size can be custom requested, such as 1/7th scale for the big FE setups in the NW. These kits start out based on the Newton drawings with improvements being made to ensure correct fitment of every frame, crossing point, and many modifications to all aspects or ride surfaces, hydrodynamics, and aerodynamics. Many of the mods have been reviewed and changes made by many of the countries top racers to ensure your build will be ready for todays racing requirements. Custom modifications can be made if requested if you have a technique you feel will benefit the kit of your choice. The basic frames make a variety of different boats based on the master hull roster #'s. If you are uncertain of a particular hull, please ask, or view the master hull roster and see if the kit you are needing is one of the hulls I have done. The named

hulls below are just a sample to what some of the kits make! Kits do vary in price depending on the complexity, so please ask here, PM, email at [email protected], or call Mike @ (252) 717-6282

Check out the available kit list at my website, www.ml-boatworks.com

Click to expand...

Mike Luszcz said:

Yep, i just released the px and nx 300 tunnels for nitro and fe 3.5 size motors. Go to the outboard forum to see some pics of the 3d drawings of the kit. I also still offer the gas tunnel. The 7.5 size tunnel is currently being updated. Let me know if u have any questions. Mike

Click to expand...

Mike Luszcz said:

It is with sad news that I am letting everyone know that as soon as I can, I am going to delete my intlwaters account tonight. I appreciate all of your support over the years, but I have got to get away from intlwaters. I will continue with ML Boatworks, but new designs are being halted. I have been taking on a lot of new designs, and overdoing it. I think mentally, it has me frustrated, it has me lashing out at things, and unfortunately, intlwaters has been the hotbed for that. I have to put a stop to this as things are not fun like they were. I am partly to blame, and I take that responsibility. For that, to my friends who have watched some of the lashing out, I apologize. The new website will be where you will find my current offerings...hopefully mid October, and I have enjoyed OSE since joining, so I am going to do things there. If you need a kit, do not hesitate to email me at [email protected], or visit the website, and as always, I enjoy the phone conversations. I am still available for help, weather its with one of my kits or not..just like its always been. Thanks again to my IW friends, and customers. Take care. Mike Luszcz

Click to expand...