Are the clips from CMB . I have bought some clips that weren't from CMB and the diameter and spring tension was less than CMB. Brandon I would suggest you learn how to install these yourself since your having issues. If the clip is not properly in the groove of the piston there will be problems...
I observed this method at the last NAMBA Nats at the Las Vegas pond. I couldn't believe how far some of these guys could throw, boats were in before a retrieve boat could get to the dead boat. Not the best method for broken boats.
Ronnie that looks to be an older RR model. looks like the boom spacing is determined by the boom length which is how the current models are setup. I would check for a little toe in on the R sponson and run the boat. As for a cowling thats going to be determined by the tub width, the current 45...
Ronnie what model RR do you have, what year? The current RRs have 1/16 or so toe on the turn fin R sponson and L sponson is set wider than the R. Your best source would be Ralph Almirola or Joe Warren. I will look and see if I have the set up info for mine , my is currently in a friends trailer.
Thanks again Mario for the update. I'm sure many people are seeing the value of your posts and Buckshots JAE45 builds. The JAE has evolved into a competitive heat racing boat that many new boat modelers can afford. I have been fortunate enough to travel to many major NAMBA/IMPBA races around the...