GP 310 SE Fuel tank

Intlwaters

Help Support Intlwaters:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

pmull

Well-Known Member
Joined
Feb 29, 2008
Messages
52
Where is  the Fuel tank getting located in the New ML Boatwork  GP 310 SE  Sport 20 ?
 
Last edited by a moderator:
I am using a 1 oz hopper in the front right cavity, then a 4 oz custom tank on each side of the motor for a total of 9oz.  
 
This is what the tub looks like

IMAG0699.jpg

IMAG0705.jpg
 
Last edited by a moderator:
My center I believe is the version before yours, but you can make that work forsure. You could open it up where it says m on one side and L on the other to slide the tanks in. 

Or see if you can get them in behind the motor on both sides  and if need be you can add weight in the front cavities. 
 
Last edited by a moderator:
I was thinking about a tank on both sides of the drive line .    ??????????
 
Why not make one tank that would sit down over the drive line make the tank with a tunnel down threw the middle of the tank that would be real easy to do and utilize all your space

20190110_203540.jpg
 
Last edited by a moderator:
I would like to Thank every one for the great ideas and Walt for offering to build me tanks .  This is what I came up with.

IMAG0708.jpg

IMAG0709.jpg
 
Back
Top