• If you have bought, sold or gained information from our Classifieds, please donate to Int'l Waters and give back.

    You can become a Supporting Member which comes with a decal or just click here to donate.

CMB 45s

Intlwaters

Help Support Intlwaters:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

rdg

Active Member
Joined
Sep 21, 2005
Messages
36
cmb 45s $130 each all have very little run time. all have good compression and bearings. I got tired of stripped Allen screws so I started using studs and nuts. any questions please ask.

IMG_20190105_112603140.jpg

IMG_20190105_112614219.jpg

IMG_20190105_114307866.jpg

IMG_20190105_112634649.jpg

IMG_20190105_114300590.jpg

IMG_20190105_112624012.jpg

IMG_20190105_112640609.jpg

IMG_20190105_112654481.jpg

IMG_20190105_114247348.jpg
 
I can't remember. I stopped racing early 2000s they were oiled and put away. I used it in a sport 40 that John Brown built for me raced it twice.
 
shipping is $16.00 ten days to two weeks.  $35.65 express shipping. Your choice
 
If the first engine (Disk motor not the drum) is still for sale I will take it.

Thanks david
 
Rennie, Money sent, Covered Fees Thanks

David Hall

1862 Russet Woods Lane

Hoover,  Alabama  35244
 
thanks I will ship as soon as post office opens. I will PM you the tracking number.
 
I don't know I sold and shipped the EVO end so I can't try. Maybe somebody on the forum will know. the front bearing feels a little ruff piston and sleeve still has pinch TDC carburetor bore is .465 hope this helps.
 
Got the engine yesterday, Really fast shipping.  MOTOR LIKE NEW, THANKS, David
 
Hi Rennie,  Can you send along the bore and OD of the sleeve in the remaining engine?  A picture of the sleeve out of the case will help too.  I'm looking to see if the sleeve would be compatible with an engine I have here that will need a sleeve.

Thanks,

Chris
 
Back
Top