Chris Dixon
Well-Known Member
- Joined
- Jul 28, 2012
- Messages
- 280
Here's what I've done when painting a VS1:
1. Lightly sand the clear coat.
2. I use a rattle can primer - I like Rustoleum
3. Sand the primer.
4. Apply a base coat - usually white
5. Apply decals.
If you know someone who can shoot a coat of automotive clear before applying decals, that's a good step. I just try to be extra careful when fueling the boat so as not to spill fuel on the paint.
JD
It's always good to get advise form a season boat designer. Thanks Jerry Dunlop
Enter your email address to join: