Where to get this (look at the photo i don't know the english word)

Intlwaters

Help Support Intlwaters:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

henkie

Well-Known Member
Joined
Nov 11, 2007
Messages
114
I've got a .21 valvola redhead and need to replace the third channel needle. I know which part i need but not where to get it. I've included 2 picture's.

Wildthing .21 15.JPG

CMB%2021Beta%20EVO.jpg
 
Stuart just the other way around. The first picture is what i have and the second how i need it to be.
 
I think you're going to want to replace the installed needle assy. with fuel inlet piece, similar to item #24,

and then get a remote needle assy., similar to item #23.

Like Stu said, contact CMB... I don't think the BETA fuel inlet will work with your carburetor body, but not sure.

Someone would have to validate dimensions for you.

ESPLOSO21BETADIRETTA2016.jpg
 
Tim you're right. The  assembled third needle  get's in the way with the motormount. Normally you would turn the carb a little bit but this one is bolted to the crankcase with two bolts. 
 
Back
Top