Buildlog Wildthing .21

Intlwaters

Help Support Intlwaters:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

henkie

Well-Known Member
Joined
Nov 11, 2007
Messages
114
Recently bought from Bob and started the build.

1 : Parts for building board
2 : Parts building board glued.
3 : The parts for the transom and radiobox.
4 : These 2 parts glued.
5 : The middle spar (?)
6 : The front spar (?
7 : The 3 spars (?)
8 : The 2 parts of the enginerail.
9: These 2 parts glued.
10 : Enginerail and spar (?) glued.
11 : Other enginerail also glued.
12 : Front spar (?) glued.
13 : Side's of the radiobox glued.
14 : All together on the buildingboard and glued.
15 : And maybe the powersource for this boat. I also got a greenhead i don't know which one is the better one for a mono ?

(?) is i don't know if this is the right word.

Wild thing .21 1 .JPG

Wildthing .21 2.JPG

Wildthing .21 3.JPG

Wildthing .21 4.JPG

Wildthing .21 5.JPG

Wildthing .21 6.JPG

Wildthing .21 7 .JPG

Wildthing .21 8.JPG

Wildthing .21 9.JPG

Wildthing .21 10.JPG

Wildthing .21 11.JPG

Wildthing .21 12.JPG

Wildthing .21 13.JPG

Wildthing .21 14.JPG

Wildthing .21 15.JPG
 
Last edited by a moderator:
If you stroll down the mono page a bit you see a wild thing mono info thread I posted few months back by John Finch just for some reference..
 
And further we go.

First the hardware i have ordered for this mono.

1: The rudder off M.T.C powerboat.de.

2: The powertrim off M.T.C powerboat.de.

3: The trimtabs.

4: The enginemount.

5: lumberholes.

6: Buildingboard fixated to the table.

7: Frame placed on the buildingboard.

8: Gleud the skin on the last 2 frames and fixated temporarily with staples.

9: overvieuw.

10: Pulled the nose together and glued the skin on the forward spar. Also temporarily fixated with staples.

11: close up staples.

Wildthing roer MTC.jpg

Wildthing powertrim MTC.jpg

Wildthing trimtabs.jpg

Wildthing motormount.jpg

Wildthing .21 16.JPG

Wildthing .21 18.JPG

Wildthing .21 22.JPG

Wildthing .21 25.JPG

Wildthing .21 26.JPG

Wildthing .21 27.JPG

Wildthing .21 28.JPG
 
Just ordinary wood gleu from the brand Bison. The outside get's a cloth from 50 gram and the inside carbonfiber . Inside and outside will be seald with epoxy. 
 
I always build my boats with this gleu and never had a problem. The first boat i build was 24 years ago and that one is still running.
 
Back
Top