SG Twin 67

There is not much to say about this 67/80 SG Twin other than it is in decent condition with very little run time! I did not run it much and found that it stayed running better with the 67 CMB carbs. I will also include the 67 Mac carbs with the boat.

The 67 Mac motors have been ran in other riggers some before I put them in the Twin. If not mistaken I think the bearings were replaced in the motors before putting them in the Twin despite still being in good shape. These motors are still in decent condition as can be seen in the pictures. The left #1 motor has below average compression and right #2 motor is what I would say has significantly better compression. The 67/80 CMB pipes and AA headers are almost brand new and include the springs, and rubber gaskets.

The price for the complete boat is $1500.00 including 1/4 & 3/16 step down drive shafts with H-30 props on the 3/16 shafts.

I may consider parting out the boat if someone wants only the boat less motors & pipes. If the boat is wanted less motors & pipes it will be $750.00. Then the remaining equipment as follows: Mac #1 $225.00, Mac #2 $275.00, 67/80 CMB pipes & AA headers $250.00 for the pair.

The actual shipping cost is paid by the buyer. If paying by Paypal add fees or as Friend.

Please only respond to this post, no PM unless payment arrangements and shipping location are needed.

Hi Brad,

if you part the package out, I'll take the SG for $750 (less engines and pipes) plus additional postage to Australia and #2 MAC engine for $275

im interested in the both mac motors

If I am offered the asking price from anyone interested in what I have listed then they are first in line to get what I am selling. So with that said if I part the boat out Shane is first in line for the SG Twin & #2 Mac motor. To package up the boat I went out and purchased bubble wrap. There has to be proper packing to make sure as much as possible that the boat arrives safely to the buyer!

Thanks

Brad

Hi Brad,

I'd also take #1 MAC engine as well for $225, that would just leave you with the headers and pipes, ,this effectively means I have offered $1250 for the boat and engines, less headers and pipes

Shane William Bastick said:

Hi Brad,

I'd also take #1 MAC engine as well for $225, that would just leave you with the headers and pipes, ,this effectively means I have offered $1250 for the boat and engines, less headers and pipes

Click to expand...

Hi Shane,

If that is the case, I will work on packaging up the boat and related equipment less the stand and pipes. I will work on figuring out the shipping cost. That may take me about 1-day. Please send me your complete address!

Thanks Brad

ok Brad, thanks,

no rush, I'll send you a PM with address

Shane

Hi Shane,

I tried the option used most for shipping with USPS.com and the box is too large. It was attempted with 2 different size boxes to see if one would work better.

So do you know what shipping company is best? I sent this by PM as well requesting additional personal information.

Thanks

Brad

Hi Brad,

maybe US Priority Mail international - it may be around $80-$100, as long as the boat is pulled apart, i.e. sponsons removed, etc,rudder taken off, booms taken off, the engines could even be sent on their own, I buy a bit from ML Boatworks, and there is normally no problem up to 4 foot in length , and they are usually sent US- Priority international - I think they call it UPS , not USPS

Hi Shane,

I sent you a summary by PM on what boxes I am using etc. The boat is broke down as I outlined in the PM. Hopefully I can get a box cut down to 48" or shorter all depending on the hull length.

Thanks

Brad

To Shane, I sent the shipping cost by PM with insurance included on the SG Boat & 67 Mac motors. The Paypal account for me was also provided by PM.

Thanks

Brad

Payment Sent Brad,

please check my PM on postal details and information

Hi Brad,

received boat today, thankyou, arrived in perfect condition and the boat is in top notch condition, looks like its hardly been used

I will let you know when the engines arrive

all the best

Shane

Received engines and props today Brad, thanks again

Shane