• If you have bought, sold or gained information from our Classifieds, please donate to Int'l Waters and give back.

    You can become a Supporting Member which comes with a decal or just click here to donate.

LF picco 45 EXR cranks

Intlwaters

Help Support Intlwaters:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Mike Hughes

Well-Known Member
Vendor
Joined
Feb 23, 2003
Messages
4,200
I am in need of a couple of stock 7mm picco cranks. These would be the ones that were used in the motors from 95' silver EXRs to the 99' blue EXRs. I have a couple that were given to me. They have been moded and I dont like how out of balance they are. Thinking of doing some welding to build them back up but want to try and see if there are any available first. These are going in my 45 twin so would like them to be the same.

Thanks

Mike
 
Didn't some gent have a **** load of picco gear for sale just recently !
 
Last edited by a moderator:
I have a collection of engines and parts from that era. I will pick those items up tomorrow and let you know what I have

Thanks Chris

Sent from my Lenovo YT3-X50F using Tapatalk
 
Hi Mike

I have 1 crank that was measured and checked out by the late Jim Wilson as good for use. I will ship that crank to you for $15.

I am sending you a picture.

Thanks Chris

Sent from my Lenovo YT3-X50F using Tapatalk
 
I have to agree. NIce deal. Chris is sending me some other stuff as well.

Thanks again Chris

Mike
 
Back
Top