MAC/CMB 45/67/80/84 Flywheels (New)

Intlwaters

Help Support Intlwaters:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Andy Brown

Well-Known Member
Joined
Feb 8, 2003
Messages
2,657
Need to freshen up the look of your old CMB/MAC engine?

I have a few flywheels. These are the same clear anodized flywheels that where supplied on MAC and CMB engines.

CMB/MAC 45 - Available - 10 .... 8 - 45's remaining

CMB/ MAC 67/80/84 - Available - 25 .... 23 - remaining

All Flywheels $18 each, shipped in the US.

Paypal [email protected]
 
Last edited by a moderator:
Hi Andy:

I'm interested in the .67/.80 size flywheels. Will they work with (1980's) Picco P67 & P80 marine engines? They were originally equipped with the heavy black-coated steel flywheels. Would be nice to replace with aluminum (as equipped with later versions). I'm sure you're very familiar with these engines.

Do your flywheels include collets?

The Picco P67/80 crankshaft front journal dia. = 8.00mm .

The stock Picco P67/80 flywheel dimensions:

1. Overall length = 39.87mm/1.57in

2. Overall dia. = 45.79mm/1.802in

3. Rear, inside depth = 19.33mm/.761in

4. Pilot hole, front dia. = 11.00mm/.434in

5. Collet length = 17.86mm/.703in

Thanks,

Dave
 
Last edited by a moderator:
Hi Andy:

I'm interested in the .67/.80 size flywheels. Will they work with (1980's) Picco P67 & P80 marine engines? They were originally equipped with the heavy black-coated steel flywheels. Would be nice to replace with aluminum (as equipped with later versions). I'm sure you're very familiar with these engines.

Do your flywheels include collets?

The Picco P67/80 crankshaft front journal dia. = 8.00mm .

The stock Picco P67/80 flywheel dimensions:

1. Overall length = 39.87mm/1.57in

2. Overall dia. = 45.79mm/1.802in

3. Rear, inside depth = 19.33mm/.761in

4. Pilot hole, front dia. = 11.00mm/.434in

5. Collet length = 17.86mm/.703in

Thanks,

Dave
The collet is not included, but I can supply for extra $3. It is for 8mm shaft. I am fairly sure the flywheel fits around the Picco case, but I will check the fit and let you know.
 
Hi Andy:

I'm interested in the .67/.80 size flywheels. Will they work with (1980's) Picco P67 & P80 marine engines? They were originally equipped with the heavy black-coated steel flywheels. Would be nice to replace with aluminum (as equipped with later versions). I'm sure you're very familiar with these engines.

Do your flywheels include collets?

The Picco P67/80 crankshaft front journal dia. = 8.00mm .

The stock Picco P67/80 flywheel dimensions:

1. Overall length = 39.87mm/1.57in

2. Overall dia. = 45.79mm/1.802in

3. Rear, inside depth = 19.33mm/.761in

4. Pilot hole, front dia. = 11.00mm/.434in

5. Collet length = 17.86mm/.703in

Thanks,

Dave
The collet is not included, but I can supply for extra $3. It is for 8mm shaft. I am fairly sure the flywheel fits around the Picco case, but I will check the fit and let you know.
Thanks. I'll take:

04-quan Flywheel, .67/.80 ($18.00ea)

04-quan collet, 8.00mm ($03.00ea)

______________________________

Total --------------> $84.00USD

Dave
 
Neil -- received your paypal and will ship out today.

Jeff-- Yes, we still have 67 O rings for the water jacket, price is $3.39 each and shipping first class is $1

Thanks

Donna
 
Thanks Mike, Paypal received and shipping today. Sorry missed your post earlier this week
 
Back
Top