Jump to content

Mike Byer

Members
  • Content Count

    2,532
  • Joined

  • Last visited

About Mike Byer

  • Rank
    World Racer

Contact Methods

  • Website URL
    http://
  • ICQ
    0

Profile Information

  • Gender
    Male
  • Location
    Archdale, NC

Recent Profile Visitors

2,282 profile views
  1. Mike Byer

    Total Boat Epoxy

    I have used it and it's not that thin, you might be able to spray it if you thin it 50% or so.
  2. Mike Byer

    Total Boat Epoxy

    Total boat is too thick to soak in much, it must be thinned, and takes too long to cure unless the temp is just right. Look for Smiths cpes clear penetrating epoxy sealer. Thin like water, 1 to 1 mix soaks in very well. Keep in mind that what ever you use to seal only goes into the ply until it meets the next cross ply at the glue joint, but deeper on the edge grain.
  3. Mike Byer

    Total Boat Epoxy

    I've used it and wasn't impressed, what do you plan to do with it? Look at Mas brand with a no blush hardener it's a better choice for sealing.
  4. Mike Byer

    Needed 1) 21 Tuned pipe like this.HELP!!!!

    OK, 80 bucks shipped for the bunch if you or anyone else is interested.
  5. Mike Byer

    LTB 3/4 hp, 115v motir

    I bought a couple 1hp motors off ebay a while back, the price was really right
  6. Mike Byer

    Needed 1) 21 Tuned pipe like this.HELP!!!!

    These were used with novarossi with wrap around exhaust, that's why they are a little short
  7. Mike Byer

    Needed 1) 21 Tuned pipe like this.HELP!!!!

    Here you go
  8. Mike Byer

    Needed 1) 21 Tuned pipe like this.HELP!!!!

    The dia. that he has at the seam is really small for a 21 pipe. The old Picco pipes were long and thin.
  9. Mike Byer

    Needed 1) 21 Tuned pipe like this.HELP!!!!

    I think I have the pipe you mention.
  10. Mike Byer

    Needed 1) 21 Tuned pipe like this.HELP!!!!

    I've looked thru my 21 pipes and the hard part to match is the 1.410 at the seam. what is the ID of the stinger?
  11. Mike Byer

    Wild Thing 21 mono w/Nova

    OK Matt, pp is mbawks@aol.com thanks, mb
  12. Mike Byer

    Jae 21 w/Nova

    You got it Ron, thanks. Not sure if I can get it out on Friday, but Monday for sure. mb
  13. Mike Byer

    Jae 21 w/Nova

    Matt pm me your phone # and I'll text you some tomorrow.
  14. Mike Byer

    Jae 21 w/Nova

    I figure it to be one of the first generation, because of the engine mount style.
  15. Mike Byer

    Microburst F mono

    All new hull and parts, never run, does have a chip on the nose. Mount is drilled for an OPS 90. Engine not included, but I do have several new ones that I would sell. Sold as shown with all servos and one of Don's 3rd channel needle valves, and all new transom hardware. Pick a prop size and if I have it I'll include it. $375 shipped in the lower 48 only.
×