Blazer Slingshot CMB 27/28.5

Intlwaters

Help Support Intlwaters:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
I would think that the engine location would need to be change drastically as the CMB is very heavy compared to a Zen.
 
On second though, I retract my earlier post. The weight would not be that far off. I would just widen the front sponson ride pads slightly. It would still be a tight squeeze into a tub that narrow, but easily fixed with wider bulkheads and top/bottom tub skins.
 
In Italy ivano Dellanoche runs a rigger comparable to a slingshot with cmb 27. Very very fast and stable. I will try a rear exhaust SG reed engine..
All I would do with slingshot is new hood and as much flotation as you can put in
 
In Italy ivano Dellanoche runs a rigger comparable to a slingshot with cmb 27. Very very fast and stable. I will try a rear exhaust SG reed engine..
All I would do with slingshot is new hood and as much flotation as you can put in
I believe Ivano was at the last WC in France and won H-27?
 
Yes, he also won in 2016. Usually he laps the competition in a 6 lap race… So the combo can be very powerful.
 
Over the winter I also would like to build a rigger for the extra cmb 27 I have.Probably end scratch building one not sure if there’s one that you can just drop in
 
Back
Top