ML Boatworks- Scale & Sport Hydro, O/B Tunnel & Kneeler, and Mono laser cut kits

Intlwaters

Help Support Intlwaters:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
In case you have not seen the website, everything is 10% off until early January! Check it out, Mike
 
A stand for the Zippkits Envy rigger is now available. The RSX240 24" rigger and whiplash Brownie cowling are on the site now as well. There are more things coming soon too! Thanks, Mike
 
Well, after wayyyy to long, the RSX380 cowling plug is done, and the mold is being made tonight. The kit will be on the website next week! Mike

20170524_230952_zpsrugjp9ez.jpg


20170524_230943_zpscrokulbb.jpg
 
A new 35" kneeler has been released, its the KL350v2 kit. I have redone a good bit of the internal framing to help reduce overall weight, allowing for the KL320 to be discountinued. It was only ever designed to remove some of the fat the original KL350 carried. This version 2 should really help change how much weight a stock OS has to carry! Mike
 
Fall build sale on the GSX480 gas sport hydro kit. Complete wood kit, with fiberglass cowling, $225 plus shipping, normally $265 plus shipping. Get one while you can. I will run this from today, 9/20/17 until 10/20/17. Thanks, Mike

https://mlboatworksrc.smugmug.com/GSX-480

IMGP5034_zps84502ccc-XL.jpg
 
Last edited by a moderator:
Just so everyone knows, the website has been updated to $225 plus shipping with cowling. No need to do anything other than add it to the shopping cart, and check out! I am ready to make cowlings! Mike
 
I am doing a previously unannounced sale for the fall, and its a really good one. The most I have ever offered off of my products, and it is a site wide sale. Scale, Extreme Scale, Wild Thing Mono, RSX Rigger kits, replacement cowlings, stand kits, hydro trailer kits are all at 15% off, while most everything else on the site is around 8-14% off...This includes all the Sport Hydroplane and Kneel down Hydroplane kits fiberglass hulls and outboard cowlings that I offer..Including the STV cat! Check it out. I am not disclosing the ending of the sale, so don't delay! Anything fiberglass related please understand I build to order, and I cannot judge how many things might be ordered, so please give me the time your build deserves! So check out the site, www.mlboatworksrc.com, and feel free to ask questions to my email, jamesmluszcz@hotmail.com. Thanks! Mike Luszcz, ML Boatworks
 
Well, I am back working on some scale kits, and I just finished the 146 newton/ 8401-8700 Lucero Sponson gas scale kit (84 Atlas, 88 Circus/ Miller) and the 121 newton/ 6615 gas scale kit (66-68 My Gypsy, 66 Smirnoff, and more). Both of these are on the website now! Mike
 
The 129 Newton, 7029 1/8th scale kit is now available, and on the website. Makes boats like the 71 Lincoln Thrift, 70 Atlas Van lines, and 80 Miss Rock KISW, and more! Mike

129Layout-X2.jpg
 
Last edited by a moderator:
The Newton 133, 7817 1/8th scale kit is now available, and will be on the website by tomorrow. Makes the U-17 Tempus 1978, the U-12 Miss Bud 1980 and the U-15 Pepsi America's Choice 1987.

133layout-X2.jpg
 
Another scale kit is done! The 118 Newton, 7175 U-75 Miss Timex '71, U-70 Such Crust '76. U-100 Miss Rock '80, and many others...in 1/8th scale, is ready. I will add it to the website soon. Thanks, Mike

118layout-X2.jpg
 
Last edited by a moderator:
And yet another 1/8th scale kit is ready. The Newton 131 kit, which make a bunch of hulls. The -54 Gale IV, U-55 Gale V, U-54 Wildroot Charlie, U-13 Tempo VII, U-99 Short Circuit, '55 U-9 Hawaii Kai, and many more. Thanks, Mike

131Layout-X2.jpg
 
And now the Newton 115, 1/8th scale '50 Slo Mo Shun IV U-27 kit is now done and one the website!

115Layout-X2.jpg
 
Another one done, the Newton 116 , 1/8th scale '51 Slo Mo Shun U-37 scale kit is now done and will be on the website today.

116Layout-X2.jpg
 
The 147 1/10th scale Bubble Bud 1985 is now available, and on the website!

The new GSX version 2 series has been added to the website as well, with a 31.5", 33.8", 38" being available now, and soon the 26.5"...and down the road, a new gas sport 480 v2 as well. Mike
 
Sorry Mike I started something that I did by posting my ML boatworks kit from day one to paint so far on facebook.lol.Its good business ehhh.Michael Shannon Harrison on hear Shann Harrison
 
Its all good! Your build is looking great btw, I would love some pics of it in the water sitting when its done. I will add them to the website!
 
Back
Top