• If you have bought, sold or gained information from our Classifieds, please donate to Int'l Waters and give back.

    You can become a Supporting Member which comes with a decal or just click here to donate.

FUEL,BOATS,PARTS (PART 2)

Intlwaters

Help Support Intlwaters:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

NAMBA860

Well-Known Member
Supporting Member
Joined
Sep 4, 2007
Messages
3,762
1.FRESH CASE OF ODONNEL 4 GALLONS 50 % BOAT FUEL. I WILL BE IN CAMARILLO,CA THIS WEEKEND OR IT CAN BE BROUGHT BACK TO LAS VEGAS AFTER THE RACE THIS WEEKEND $125

2.BRAND NEW MAGIC 40 INCH MONO FRESH PICCO .67 ENGINE WITH ALL NEW SEADUCER HARDWARE. BLUE PRINTED BOTTOM WITH SPEED COAT COMPLETE SEADUCER RADIO BOX WITH SERVOS. ADD TX/RX AND GO! $300 SHIPPED

3.39 INCH CALCRAFT MONO CURRENTLY IN 3RD PLACE OVERALL NAMBA DIST. 19 POINTS. FRESH GERAGHTY MODIFIED PICCO .45 IRWIN PIPE TIDE WATER HARDWARE BOAT IS IN GOOD CONDITION AND RUNS GREAT. ADD TX/RX AND GO! $275 SHIPPED

4.BRAND NEW 33 INCH CALCRAFT MONO SET UP FOR STRAIGHT LINE OR 2 LAP IT CAN ALSO BE HEAT RACED. BOAT WEIGHS IN AT 4.25 LBS FRSH BUILT HIGHLY MODIFIED GERAGHTY K/B 3.5 DRUM ROTOR ENGINE CASE HAS GIRDLE, PAUL DASONVILLE TITANIUM ROD SLEEVE TIMING CHANGE AND CUT BY GERAGHTY,IRWIN/COOPER S PIPE SPINS A MODIFIED OCTURA 646 3 BLADE. BOAT HAS BEEN WET 2 TIMES AND HAS RAN 55MPH ON GPS WITH OUT MAKING ANY CHANGES TO THE PIPE,PROP ETC RIGHT OUT OF THE BOX! THIS BOAT IS ONLY 3 MPH AWAY FROM THE CURRENT STRAIGHTLINE RECORD. $300 SHIPPED

5.GOOD SIZE LOT OF DIFFRENT SIZE HEADER SPRINGS AND HEADER GROMMETTS $20 SHIPPED

6.GOOD SIZE LOT OF NEEDLE VALVE ASSY. AND 3RD CHANNEL NEEDLES FOR ALL DIFFRENT APPLICATIONS $20 SHIPPED (sold)

7.SMALL LOT OF TRIM TABS FOR MONO HULLS $10 SHIPPED (sold)

8.LARGE LOT OF MOTOR MOUNTS,TURN FINS,RUDDERS,BRACKETS AND STRUTS MOST ALUMINUM AND SOME STAINLEESS $45 SHIPPED (sold)

9. LARGE LOT OF ENGINE COLLETS 1/4 AND 3/16 FOR ENGINES SIZES .21 TO .90 $20 SHIPPED (sold)

10.4 K/B CARBURETORS 2 EARLY 7.5 OUTBOARD 1 NEW K/B 7.5 INBOARD OR OUTBOARD AND 1 OLD STYLE K/B .67 INBOARD OR OUTBOARD CARB. $30 SHIPPED

11. 2 CMB HEAD BUTTONS ONE NEW .67 DOUBLE PLUG AND ONE USED .80 SINGLE PLUG $18 SHIPPED

12. LOT OF GOOD ENGINE BEARINGS MOSTLY K/B AND PICCO $20 SHIPPED (sold)

13. .45 NITRO PIPE $25 SHIPPED

14. ROSSI .90 CRANKSHAFT HOUSING WITH BEARINGS $15 SHIPPED

15. large lot of mostly new fuel tanks a few used at least ten all together,sullivan,hayes,dubro etc. $25 shipped

I DO HAVE ABOUT 20 NITRO SIZE ENGINE PROPS I WILL SELL ONCE THE NITRO BOATS ARE GONE. ALL PRICES ARE SHIPPED IN THE LOWER .48 STATES. I CAN EMAIL PICS IF WANTED,SHANE
 
Last edited by a moderator:
Hi Shane,

i´m interested on pos. 8+9, please send me pic´s
 
I'll take #12 (bearings) and #6 (needle valves) if Beau passes.

Brad
 
Last edited by a moderator:
Shane

the cmdi has the black plastic top with the servo arm and a metal bottom. I dont have a picture of one maybe someone on IW does they can send you so we are on the same page.
 
I do need a couple of needles I just want to make sure they are the design I am in need of. I want first dibs on them and if they are not the style Brad spencer can decide if he wants them.
 
Back
Top