Roxyflash's latest activity

Need to know the spacing on front sponsons mounted the transom hardware engine needle vavle and front sponsons need to drill the tubes...

The older 23 zenoah are not that good there only two transfer ported the later are 4 so there not that great compared to the new engines

The zenoah appears to be the older 23 cc with big plug

Easy to make thanks for the reply.

So do you put a needle in the y fitting and screw it in or out for the flow?

Here’s the eagle sg 21 from 2001 the paint has been in the basement on the top shelf found it two weeks ago I was happy it turned out I...

Temp was good today windy but doable.Want this project done.I found some old Imron paint from my daughters 20 eagle medium blue matches...

Thanks for the reply’s Buckshot you say to regulate flow at rudder do you restrict the water nipple?

I always thought it should around 12

Wasn’t easy I thought I was done rebuilding for the winter then Adam shows up with this project being Dick Jones old boat I wanted it...

I too like hard tanks

Looking good! you using a hard tank or bag?

Looks like some orange peal going on but at least it’s painted!The klasskote can be sanded and repainted if the orange peal bothers you.

Found the grommets same size as a ceiling fan blade grommet.Stripped the boat needs a final sanding before I epoxy seal it.filled a few...

Need pipe lenght for cmb black quiet pipe and drill hole size for water jacket going to plug the outlet and use a drilled hole for water...