Recent content by Jim Dorcy

Contact Glenn Q on here and get a Nova Rossi .21 Outboard Header Or Contact Stu Barr and get a CMB one. The Nova one is nicer but either will work If you want a .45 Outboard the Nova .46 is the best choice IMHO also from Glenn Q

Could also be that you guys are going much faster ? . I have nothing to compare to apart from the Stalker Pro. My best speeds have been in the 56 - 57 mph range with the boat on the looser side and 54 - 55 mph locked down

Mine are round 37.8 - 38.2 mm dia and vary from 3.0 -3.3 I have been mainly playing with LE pitch since I found what my setup likes I can't imagine bolting on the V1 muffler and going slower. just can't see it on mine at all but then again I am a long ways from Box Stock internally

On my boat with the V1 muffler I have to go 1/4 turn leaner and its down 2 - 3 mph. V2 muffler 1/4 richer and 2- 3 mph faster. Switching heads made no difference however my water cooled head was restricted. There is More RPM in the V2 Muffler. I have tested back to back to back to back and...

Its only a Dust seal.

The muffler from a V2 will make a V1 motor faster. Been there tried that.

Yep many ways to peel an orange as long as its working. I saw a guy on here who put the OS inflight needle into the carb an used another throttle cable and mount to operate it. Pretty sweet idea

I use the smallest size fuel tube over the throttle cable then clamp never had one move. If you use the really small size throttle cable ( I like it ) I use the about 1/2 an inch of the other larger size outer over the top then use the fuel tube

Sounds Lean My Nova motors like around 90 - 100 on my gen 3a Boris

way way way old post here fella It your right sponson lifts its game over in a right hand turn. the boat will blow off What Brian Blazer was saying I think was the anhedral allows the boat to slide left in a right hand turn ( understeer) without the inside edge catching as much (reduced...

For Sale Section ??

What does that mean Allan ??