Monos

dr gary turner · May 24, 2016

We saw some incredible GAS monos at the Humtsville race. Fast and handled the water vary well.

Could a 101 work in such a boat?

What are some of the manufactures?

What are the pros and cons of each?

BigChuck · May 24, 2016

You will not run through the corners as hard as a SD44......

Motors are heavier, pack more power, Hulls are much larger...

IMHO...strait line speed would be up... But your get one and let us know how it works...

Danny King · May 24, 2016

https://youtu.be/zcsBEuq07k8

This is the 45" seaducer with a gas motor. Not a better running mono out there. None of the bigger gas monos would run with a seaducer with a nitro in it. This particular video the boat is running 69 mph. It now consistantly runs 76 to 77. So even if it was trimmed down for heat racing it would be very hard to beat.

julianconde · May 24, 2016

My 44 inch seaducer works perfect with 101RS. Here's a link of my seaducer with big block power. This boat is a missile hard to beat as well compare to the gas hulls

dwilfong · May 24, 2016

double post............

dwilfong · May 24, 2016

Well lets see.......Rico off shore mono.........This was the first set up I built for the VAC 1.05..........

Luis ran this at the Winter Nats a few years ago when it was at Melbourne FL.

Lets gust say it would hang with any thing out there............Including Jerry's own 1.01 Seaducer.......

Don't count the gas hull out is all I am saying...................................Thy might just surprise ya...............

stan simpson iv · May 24, 2016

"Doc"...Get a Micro Burst 51" put Twin NR 91's in her. That would be a 'BAD AZZ" heat/offshore racing Mono. You would make some big holes for the other boats you are racing against. JMO

P.S. and a couple of Game Changer's

David Ashcroft · May 25, 2016

Julian good video very quick ducer..

julianconde · May 25, 2016

David Ashcroft said:
Julian good video very quick ducer..

Thanks brother. Just helping the cause lol

sbowden21 · May 25, 2016

delete

Piston1 · May 25, 2016

Doc here's my opinion,

Will a 101 work on a Gas hull. I think the answer is yes.

Go to JRCBD and you will find lots of Mono information, lots of builds, pictures and

videos that will help you see how they run. The pros and cons between hulls is for you to find out.

Happy boating.

David Bryant · May 25, 2016

julianconde said:
My 44 inch seaducer works perfect with 101RS. Here's a link of my seaducer with big block power. This boat is a missile hard to beat as well compare to the gas hulls

man, I don't know how you guys can see in those conditions

(at least from the camera view), intense glare

julianconde · May 25, 2016

David Bryant said:
julianconde said:

My 44 inch seaducer works perfect with 101RS. Here's a link of my seaducer with big block power. This boat is a missile hard to beat as well compare to the gas hulls

Click to expand...

man, I don't know how you guys can see in those conditions

(at least from the camera view), intense glare

I could not see anything what you saw in the video was good compare to my eyes that day lol. I cut a bouy because I did not see it out there still came back and got 3rd in that heat.

BigChuck · May 25, 2016

Doc...you have been racing F-mono for years....Jose, Joe,Myself that many years with you.....Do you think its the hull... ??

dr gary turner · May 25, 2016

The hull

dr gary turner · May 25, 2016

Looking for alternative.

Tried to register on the Dock and it is impossible

dr gary turner · May 25, 2016

dwilfong said:
Well lets see.......Rico off shore mono.........This was the first set up I built for the VAC 1.05..........

Luis ran this at the Winter Nats a few years ago when it was at Melbourne FL.

Lets gust say it would hang with any thing out there............Including Jerry's own 1.01 Seaducer.......

Don't count the gas hull out is all I am saying...................................Thy might just surprise ya...............

dr gary turner · May 25, 2016

Where can you get the Rico hull?

julianconde · May 25, 2016

dr gary turner said:
Where can you get the Rico hull?

Gary I have a Rico 48" offshore mono. Give me a call

dwilfong · May 25, 2016

Ya the one I gave you ........LOL

Doc call Richey 321 508 9703 he will set you up.

Blew his mind when he saw it run with a nitro eng in it. He stepped back from the pond as it came by the first time running in the white caps at Melbourne.

It handles the rough water killer..............

Monos

Help Support Intlwaters:

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Similar threads

Join the conversation!

Join today and get all the highlights of this community direct to your inbox. It's FREE!