charles siler
Well-Known Member
- Joined
- Oct 29, 2011
- Messages
- 2,004
Ok guys looking for a couple of props ABC 2314 & 2316 Sharpened or raw thanks pass you guy's later Charlie
-
If you have bought, sold or gained information from our Classifieds, please donate to Int'l Waters and give back.
You can become a Supporting Member which comes with a decal or just click here to donate.
WTB ABC 2314 and 2316
- Thread starter charles siler
- Start date
-
- Tags
- wtb 2314 and 2316
Help Support Intlwaters:
- Joined
- Dec 3, 2003
- Messages
- 3,342
charles siler
Well-Known Member
- Joined
- Oct 29, 2011
- Messages
- 2,004
Hi Walt I'll be able to buy both if you still have them thanks Charles
charles siler
Well-Known Member
- Joined
- Oct 29, 2011
- Messages
- 2,004
Hi Mark I'll take two if have them still raw if you would thanks Charles
charles siler
Well-Known Member
- Joined
- Oct 29, 2011
- Messages
- 2,004
A you guys you ever going to get back to me on these props I want two of each. Thank Charles
Charles,
What is the application for the 2315's? 45 or 67 Hydro?
I just want you to know that the stock numbers on a Raw 2315 are:
7.50" of Trailing Edge cup at .7 radi
5.29" of Center Of Blade Pitch
58.25 mm in diameter
With 17 degrees of rake
If you want mm it is a 58 X 87 with 3.45" of nominal pitch overall
$51.00 shipped to you.
I thought you bought these all from Walt Barney? I would rather people call me,
PM me, or email me about orders, as I do not read all of IW everyday anymore.
I have been busier this year than any other in the last 14 years.
I have 3- 2314's in stock also? The 2315's are packaged up and ready to ship tomorrow.
Let Me Know Your Address Again Please?
Mark Sholund
My email and PayPal address is: [email protected]
231-590-3023
What is the application for the 2315's? 45 or 67 Hydro?
I just want you to know that the stock numbers on a Raw 2315 are:
7.50" of Trailing Edge cup at .7 radi
5.29" of Center Of Blade Pitch
58.25 mm in diameter
With 17 degrees of rake
If you want mm it is a 58 X 87 with 3.45" of nominal pitch overall
$51.00 shipped to you.
I thought you bought these all from Walt Barney? I would rather people call me,
PM me, or email me about orders, as I do not read all of IW everyday anymore.
I have been busier this year than any other in the last 14 years.
I have 3- 2314's in stock also? The 2315's are packaged up and ready to ship tomorrow.
Let Me Know Your Address Again Please?
Mark Sholund
My email and PayPal address is: [email protected]
231-590-3023
Last edited by a moderator:
Kris Flynn
Well-Known Member
- Joined
- Mar 11, 2002
- Messages
- 4,339
I have one of each. ..new in bags
also have 2318
$18ea shipped
Edit: lowered my price (was $20ea)
also have 2318
$18ea shipped
Edit: lowered my price (was $20ea)
Last edited by a moderator:
charles siler
Well-Known Member
- Joined
- Oct 29, 2011
- Messages
- 2,004
Hi Mark it's for my 45 JAE twin that I'm building this winter that was a fast prop on my single years ago. The we're 2314 and 2316. Not sure what the difference is on the 2315 I would like a set of both balance and Sharpened please. Thanks Charles
Charles,
I would suggest you break-in the motors with a set of 2215's,
and then step up into the 2315's when the motors are ready to
Rock & Roll. The 1.5 pitch ratio seems to be a very good one on
the JAE's in heat race trim, and the 17 degree rake is working very
well with controlling the lift.
Thanks,
Mark Sholund
I would suggest you break-in the motors with a set of 2215's,
and then step up into the 2315's when the motors are ready to
Rock & Roll. The 1.5 pitch ratio seems to be a very good one on
the JAE's in heat race trim, and the 17 degree rake is working very
well with controlling the lift.
Thanks,
Mark Sholund
charles siler
Well-Known Member
- Joined
- Oct 29, 2011
- Messages
- 2,004
Sounds good Mark let's do that . A set of both B/S if you would. Charles
ALLAN YUEN
Well-Known Member
- Joined
- Jan 14, 2005
- Messages
- 6,427
Hi Charles I had sold my 45 Twin's MAC45 Best 2218 little rake for 45 twin good increase speed "smooth" than 2316 ( too big) hardly pull "drag " Good Luck!
charles siler
Well-Known Member
- Joined
- Oct 29, 2011
- Messages
- 2,004
Yes Allan you are right but not for a twin JAE. Depending on the drag you may have to cut down the prop to get it to work properly. Thanks for the concern AllanHi Charles I had sold my 45 Twin's MAC45 Best 2218 little rake for 45 twin good increase speed "smooth" than 2316 ( too big) hardly pull "drag " Good Luck!
charles siler
Well-Known Member
- Joined
- Oct 29, 2011
- Messages
- 2,004
Hi Mark any idea when you might be able to finish them up .
charles siler
Well-Known Member
- Joined
- Oct 29, 2011
- Messages
- 2,004
Thanks Mark just let me know.
Similar threads
