Suggestions on clear coat over finish epoxy

douglong · May 22, 2016

I have just finished applying the third coat of 20 minute finish epoxy on my outrigger tub, after the epoxy dries I will lightly wet sand the tub and would like to spray it with clear. Any suggestions on which clear I can use.

Thanks

Doug

Mike Byer · May 23, 2016

I use a 2 part automotive clear and spray with a small jam gun, but it depends on what type of equipment you have. Very fuel resistant when cured.

mb

Ernie Testani · May 30, 2016

I have used Klass Kote epoxy for years and it holds up to Gas and Nitro fuel.

Ernie

JRXHydros · May 31, 2016

For $20.00 you can get automotive 2k clear coat in a spray rattle can that works great!!!!!!!!You can also use Rust OLeum paint that comes in all kinds of colors even metal flake to use with the 2k clear coat. Paint on your colors....even in your fuel bay,engine bay & bait box. When colors dry & cannot smell the Rust Oleum Paint anymore...then spray on your 2k clear coat. When dry you will have a mirror shine & 100% water & fuel proof protection. Must sand in between colors.

dr gary turner · Jun 21, 2016

Where do you get 2k clear coat??

michael winter · Jun 21, 2016

dr gary turner said:
Where do you get 2k clear coat??

http://www.tcpglobal.com/USC3680061.html?sc=111&category=1931670#.V2nISfkrJD8

dr gary turner · Jun 21, 2016

Thanks

dave weagel · Jun 21, 2016

dr gary turner said:
Where do you get 2k clear coat??

http://repaintsupply.com/spraymax-2-part-2k-urethane-aerosol-clear-coat-p3685.html

David Bryant · Jun 25, 2016

SprayMax 2K looks like very good product! I'm curious how it matches up to other popular 2-part epoxy finishes like Klass Kote (in terms of high-nitro fuel proof resilliance)?

JRXHydros · Jun 27, 2016

David Bryant said:
SprayMax 2K looks like very good product! I'm curious how it matches up to other popular 2-part epoxy finishes like Klass Kote (in terms of high-nitro fuel proof resilliance)?

2k will stand up to it like a brick wall.

Suggestions on clear coat over finish epoxy

Help Support Intlwaters:

douglong

Well-Known Member

Mike Byer

Well-Known Member

Ernie Testani

Member

JRXHydros

Well-Known Member

dr gary turner

Well-Known Member

michael winter

Well-Known Member

dr gary turner

Well-Known Member

dave weagel

Well-Known Member

David Bryant

Well-Known Member

JRXHydros

Well-Known Member

Similar threads

Latest posts

Suggestions on clear coat over finish epoxy

Help Support Intlwaters:

Well-Known Member

Well-Known Member

Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Similar threads

Join the conversation!

Join today and get all the highlights of this community direct to your inbox. It's FREE!