• If you have bought, sold or gained information from our Classifieds, please donate to Int'l Waters and give back.

    You can become a Supporting Member which comes with a decal or just click here to donate.

Race Ready Props at The Speed Shop

Intlwaters

Help Support Intlwaters:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Eric Canto

Well-Known Member
Supporting Member
Joined
Jun 21, 2003
Messages
1,270
Finally got caught up on regular orders and fixed up these Race Ready props. Available for immediate shipment. Thanks.

M447 - Diameter 46.90" Cup - 4.29" - $39.95 - Sold

1667 - Full Blade Diameter Cup - 6.20" - $55.00

1667 - Diameter Cut to 63.00mm Cup - 6.0" - $55.00

1450 - Diameter Cut to 44.75mm Cup - 3.50" - $50.00 - Sold

1462 - Diameter Cut to 57.10mm Cup - 4.29" - $50.00 - Sold

2167/3 - Full Blade Diameter Cup - 5.6" - $60.00 - Sold

1667 - Diameter Cut to 63.50mm Cup - 6.43" - $50.00

​BARGAIN PROPS

X-457 - Cut to 54.11mm Cup - 5.00" - $29.99

ABC 2114 - Cut WAY DOWN to 45.5mm - Very reduced blade area - Back Cut - Cup-3.75" - $29.99

Free shipping in lower 48 on all props

props.JPG
 
Last edited by a moderator:
Garrett - it is a lot of work to cut that prop down that far and then thin it back out but it is a wicked .40 hydro prop. Thanks for the purchase.. Paypal is [email protected]
He knows that Eric. Garett has many of my cut down props going back 15 years to currently.

You will get to race him in .45 and Open hydro this weekend. :)
 
Hi Eric, Would you be prepared to ship to the UK - at my cost ?

If so, and if payment by PayPal is ok, I'd like to take the M447 please.

Ian Searle
 
Last edited by a moderator:
Hi Eric

what would the 1450 cut down and 2167/3 be good match's for in hydro type and size

thanks

Shane
 
Hello Shane. The cut down 1450 is a dynamite .20 hydro prop. The 2167/3 is really a SAW prop. I put a pair on a regular heat racing SGX twin with MAC .84's and went over 110 pretty easily. I haven't tried to set up a boat for heat racing with one but it would be interesting. I think just with strut adjustment and maybe some tip rake, it could be a real 100mph heat race prop. Thanks.

Eric
 
Last edited by a moderator:
Hi Eric, The prop arrived on Saturday. Stunningly fast arrival, and a beautifully done prop. I ran it yesterday, and it works great too. Thank you once again.
 
Hey Eric, is that 457 still around?

let me know...and Ill pm you my addy and paypal you

thx,

Len
 
Last edited by a moderator:
Back
Top