44" conquest cat offshore

JasonBoushard · Sep 25, 2015

hey guys its my first boat I have a motor pipe engine mounts strut and rudder. what else do I need?

I know I need the following at least.

1 fuel tank/bag size?

1servo but what size?

rx

radio box

props

shafts

anything I should have when I go to the lake?

Ron Olson · Sep 25, 2015

IV bag, 500cc will do in most cases or 16-18 oz. Plastic tank.

I've been using Hi-tec HS 645 MG's for the rudder and and standard servo for the throttle Don't use a Futaba 3003, they're junk.

Flex cable, a 24" then cut to length.

A prop will depend on your motor, stock or modded.

As far as a radio box goes, I've been getting that and many other things on your list from www.zippkits.com .

Start yourself a toolbox for the boat. Whatever you use to assemble the boat with, toss it in that box. Start with a 5/16" wrench or socket, 9/16" and 5/8" wrenches, separate and not a combo wrench as you'll need both for the flex cable collet. A small screwdriver for the needles. A 10mm wrench (motor mount isolator nuts). A set of Allen wrenches especially a 3mm. Spare plugs.

JasonBoushard · Sep 25, 2015

thanks ron

Tom Foley · Sep 25, 2015

fun boats , keep your CG a bit forward or it will blow over easy . Loved mine .Good luck !!

jeff baham · Sep 25, 2015

buy some pool noodle and stuff inside of side rails

Patrick Mulvany · Sep 25, 2015

As said prior but for an inexpensive excellent prop I have run an Octura X670 just balanced and sharpened in Offshore and kicked serious butt!!!

Later!!

Pat

Daniel's Racing · Sep 25, 2015

Just a few things.

You need one strong steering servo 200 oz. in. minimum is better and a decent throttle servo. Pushrods, ball links, pushrod seals and mounts, switch, receiver battery, Servo mounts, water outlets, bulkhead fittings, water line, fuel line, stuffing tube, stuffing tube sleeve, collet, bushing, 500ml gas bag, fuel fitting, fuel "T", fuel plug, antenna mount and tube, pipe mount, cowl locks.

https://youtu.be/yhdhJuTvKos

https://youtu.be/Ii9ybPxNpRY

https://youtu.be/qGgZLfgIXVE

JasonBoushard · Oct 10, 2015

should I get one of the fuel pumps?

Daniel's Racing · Oct 10, 2015

Yes you will need a pump to fill the fuel bag.

Fresh new gas can is good idea. Nice to have an adapter that makes the can a fueling station with the fill nozzle and a fuel filter.

JasonBoushard · Oct 11, 2015

Nice sett up there where did you get it if you don't mind me asking.

Andrew Coppolino · Oct 14, 2015

Daniel makes them and just about everything else for a a toy boat including one of the best engine builders about

JasonBoushard · Oct 15, 2015

thanks

Andrew Coppolino · Oct 15, 2015

Daniel Place go to post number 9 mate and thats him

44" conquest cat offshore

Help Support Intlwaters:

JasonBoushard

Well-Known Member

Ron Olson

Well-Known Member

JasonBoushard

Well-Known Member

Tom Foley

Well-Known Member

jeff baham

Well-Known Member

Patrick Mulvany

Well-Known Member

Daniel's Racing

Well-Known Member

JasonBoushard

Well-Known Member

Daniel's Racing

Well-Known Member

JasonBoushard

Well-Known Member

Andrew Coppolino

Well-Known Member

JasonBoushard

Well-Known Member

Andrew Coppolino

Well-Known Member

Similar threads

Latest posts

44" conquest cat offshore

Help Support Intlwaters:

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Similar threads

Join the conversation!

Join today and get all the highlights of this community direct to your inbox. It's FREE!