• If you have bought, sold or gained information from our Classifieds, please donate to Int'l Waters and give back.

    You can become a Supporting Member which comes with a decal or just click here to donate.

ABC Sport 40 props

Intlwaters

Help Support Intlwaters:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Sam,

Currently testing some new ones:

1915-17-45%

2015-17-45%

2115-17-45%

2116-15-60%/3

Thanks,

Mark Sholund
 
Sam,

That is not how we are testing them.

We have reduced the cup at .7 radi on all of ours.

Thanks,

Mark Sholund
 
Sam, & Mike,

It was a 10 degree rake and a 50% blade area.

Too much blade area for most motors.

Happy Holidays,

Mark Sholund
 
Just got done testing 3 new ABC props for Sport 40. Very nice. I kept hearing you have to change boat setup for these props and you don't. Not one bit. Thanks Jim for the expedited service.
 
2015-19-38/2

2014-10-50/2

1915-19-38/2

In comparison to a 452/2 reduced to 50mm, detounged and Lynx cut.

The 2015 had very similar speed.

The 2014 had very similar speed but had more RPM

The 1915 was just too small for the power these motors put out.

Very happy with them.
 
Last edited by a moderator:
2015-19-38/2

2014-10-50/2

1915-19-38/2

In comparison to a 452/2 reduced to 50mm, detounged and Lynx cut.

The 2015 had very similar speed.

The 2014 had very similar speed but had more RPM

The 1915 was just too small for the power these motors put out.

Very happy with them.

The 19.
Did the 2015 mill and back on pipe good?

Or is the 2014 better in that aspect
 
Back
Top