Mystery pipes?

Intlwaters

Help Support Intlwaters:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Terry Keeley

Well-Known Member
Supporting Member
Joined
Jul 24, 2002
Messages
7,116
A club member was asking me if i knew what these were. Large on has about 3/4" ID, small one is 1/2" or so.

IMG_0213.jpg
 
Hey Terry;

They both appear to be Mac aluminum torque enhancing ( banded mid section ) nitro pipes. The larger might be for .67 to 1.01, and I don't know about the app for the smaller.
 
The 3.5 pipe looks to be a Prather 3.5 pipe with the long lead in tube cut down. Trust me I know, I used to work there. The larger pipe is either a 1140 or 1160, an 1140 would have a max dia of 1.5", the 1160 would have a max dia of 1.625".(hard to tell from pic) The 1160 was at one time recommended for the Picco 45 by Steve ODonnell.
 
Last edited by a moderator:
The 3.5 pipe looks to be a Prather 3.5 pipe with the long lead in tube cut down. Trust me I know, I used to work there. The larger pipe is either a 1140 or 1160, an 1140 would have a max dia of 1.5", the 1160 would have a max dia of 1.625".(hard to tell from pic) The 1160 was at one time recommended for the Picco 45 by Steve ODonnell.

Super, thanks! I'll pass the info along...
default_smile.png
 
Back
Top