Jack ODonnell
Well-Known Member
- Joined
- Jan 2, 2006
- Messages
- 548
Looking for a outboard crankshaft for a 3.5 Novarossi engine. J.
Crankshaft
- Thread starter Jack ODonnell
- Start date
Help Support Intlwaters:
- Joined
- Feb 23, 2003
- Messages
- 4,200
Im assuming the newer version. I have a SS version that I might sell.
Robert Pickard
Well-Known Member
- Joined
- Dec 17, 2013
- Messages
- 2,694
If Mike doesnt get with Ron Shaw
Rene Danner
Well-Known Member
- Joined
- Jun 7, 2009
- Messages
- 877
Jack what size 14mm or 14.5mm?
- Joined
- Oct 10, 2007
- Messages
- 1,059
going through this rightnow. rene pointed me in the right direction
jaxracer
Well-Known Member
- Joined
- Jan 17, 2005
- Messages
- 767
There was a link somewhere for the Technopower outboard crank that's supposed to be a direct bolt in for the 14mm 16.8 stroke Nova Rossis. Maybe somebody on here still has the link.
Edit: I think this is the crank here that fits it:
http://www.worldchampionproducts.com/en/tp01001-21xm7/378-crankshaft-21-ob14-168-35-245-cwr.html
-Mitch
Edit: I think this is the crank here that fits it:
http://www.worldchampionproducts.com/en/tp01001-21xm7/378-crankshaft-21-ob14-168-35-245-cwr.html
-Mitch
Last edited by a moderator:
Kris Flynn
Well-Known Member
- Joined
- Mar 11, 2002
- Messages
- 4,339
Techno Crank looks really good.
Although, it has very low timing numbers (EDIT: Compared to what some guys run) and a 1mm smaller bore through the crank (might even be 0.8mm).
I have a stock lights Crank for a 14mm Nova if you need Jack...you will just need a PTO (Ken Retallick over here is doing great things with some using the Techno PTO shaft)
Although, it has very low timing numbers (EDIT: Compared to what some guys run) and a 1mm smaller bore through the crank (might even be 0.8mm).
I have a stock lights Crank for a 14mm Nova if you need Jack...you will just need a PTO (Ken Retallick over here is doing great things with some using the Techno PTO shaft)
Last edited by a moderator:
Alan Elzer
Well-Known Member
- Joined
- May 21, 2006
- Messages
- 1,629
Kris do you know where I could get a outb crank for converting the nova T5 port? And what are there crank diameter?
- Joined
- Apr 13, 2011
- Messages
- 6,347
Jack ODonnell
Well-Known Member
- Joined
- Jan 2, 2006
- Messages
- 548
Hi Ron, The keep 21 has the extra long stroke , I am looking for a standard long stroke outboard crank. I think it would be a after market crank. J.
- Joined
- Apr 13, 2011
- Messages
- 6,347
Hey Jack,
I have a couple of Leyde's kits he made for the standard long stroke engines somewhere still new. I will look to see if I can find them. Would rather sell compkete with the PTO. Would you be interested? Someone else had asked me as well so I need to look for them.
I have a couple of Leyde's kits he made for the standard long stroke engines somewhere still new. I will look to see if I can find them. Would rather sell compkete with the PTO. Would you be interested? Someone else had asked me as well so I need to look for them.
James montgomery
Well-Known Member
- Joined
- Jun 12, 2012
- Messages
- 1,054
I believe I might have been that other person ron
- Joined
- Apr 13, 2011
- Messages
- 6,347
Yes James. It was you. I am still sorting though the stuff after moving it from my garage into my new workshop. I will be in touch with you and Jack soon as I am sure I have at least two kits leftover from before Novarossi started offering the complete outboard engines. Thanks.
Last edited by a moderator:
James montgomery
Well-Known Member
- Joined
- Jun 12, 2012
- Messages
- 1,054
Sounds good Ron...thanks 
