David Ashcroft
Well-Known Member
- Joined
- Jan 26, 2014
- Messages
- 1,670
Found this formula for measurement in relation to cutting crank intake timing mods if anyone interested.
This is an example for a 14mm crank:
-Crankshaft 14mm
-1 Full turn (360degrees)is 14xPi=43.98
-1 Degree=43.98/360=0.122mm
David
This is an example for a 14mm crank:
-Crankshaft 14mm
-1 Full turn (360degrees)is 14xPi=43.98
-1 Degree=43.98/360=0.122mm
David