JesseMelick
New Member
- Joined
- Apr 4, 2015
- Messages
- 4
Looking for raw or worked prop, or a tip on where to get one?
Thanks
Thanks
-
If you have bought, sold or gained information from our Classifieds, please donate to Int'l Waters and give back.
You can become a Supporting Member which comes with a decal or just click here to donate.
wtb 60 mm 2 blade prop for .25" shaft
- Thread starter JesseMelick
- Start date
Help Support Intlwaters:
- Joined
- May 10, 2010
- Messages
- 3,005
Showboat
Brad
Brad
JesseMelick
New Member
- Joined
- Apr 4, 2015
- Messages
- 4
Do they even exist? Or am I looking at cutting down a 70mm?
JesseMelick
New Member
- Joined
- Apr 4, 2015
- Messages
- 4
Hi mark,
This is a t offshore electric class, 41" moderate v hull, castle 2028 on 10s2p.
SShe ran mid 50s with an octura 460 2 blade that I detongued balanced and sharpened.
Problem was that the steep down snapped off ten feet from the finish line robbing me a first overall in last points race.
This is a t offshore electric class, 41" moderate v hull, castle 2028 on 10s2p.
SShe ran mid 50s with an octura 460 2 blade that I detongued balanced and sharpened.
Problem was that the steep down snapped off ten feet from the finish line robbing me a first overall in last points race.
Andy Brown
Well-Known Member
- Joined
- Feb 8, 2003
- Messages
- 2,657
I bore 3/16" hubs to 1/4" regularly for the electric guys. 57's, 60's, 62's, 65's.. I also cut X470's to 60mm regularly, but that might be too much prop for the Vee hull.
Andy Brown
Well-Known Member
- Joined
- Feb 8, 2003
- Messages
- 2,657
Jesse,
I have a raw X665 that we bored to 1/4" $28 shipped in the US if you are interested.
We can bore others, but this is what we have in stock that is ready to ship.
Good boating,
Andy
I have a raw X665 that we bored to 1/4" $28 shipped in the US if you are interested.
We can bore others, but this is what we have in stock that is ready to ship.
Good boating,
Andy
Similar threads
