Boat will not run, Trivia

Intlwaters

Help Support Intlwaters:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

TimothyJones

Well-Known Member
Supporting Member
Joined
Jun 11, 2009
Messages
1,545
Ok,

While going through all my boats, I did thorough inspection/pressurization of fuel and water lines what did I find?

Hint:

It was a leak, Not My Tubing !!,Where?

Its something I have never seen posted on here, I think.

This should be easy!

Winner gets a $10 value of something,shipping not included,HA!!....GO!!!!!

Tim
 
Last edited by a moderator:
did you check metal tank ( cracked brass tubes inside ) run then stop or fuel filer ( block from hair, small sand or piece metal rusts
 
Split seam in tank? or cracked line outside the tank.
 
Last edited by a moderator:
Depend on who company make any size silcone tubes because it worn swelling ( crack, eat fuel or loose ) must replace new one every 2 to 3 years
 
Allan

I will give you another crack at it. The metal tank thing and the tank would still pressurize with a cracked tube inside the tank.
Tin steel tank always got easy rust under bottom then leak air bubble Forget put cover grease under tank
 
Last edited by a moderator:
The stopper in a plastic tank. Leaking around the lines, between the stopper & the tank, or around the screw that holds the stopper assembly together. I've had the last one happen to me.
 
the O ring on the head
default_smile.png
 
Back
Top