12 V cordless starter

Intlwaters

Help Support Intlwaters:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

bmazor

Well-Known Member
Joined
Mar 11, 2011
Messages
959
[SIZE=10pt]This is a most powerful and lightest [/SIZE][SIZE=10.5pt]cordless[/SIZE] [SIZE=10.5pt]Starter[/SIZE][SIZE=10pt] using 12 Volt battery for belt start GAS (up to 60cc) and Nitro (up to 1.2) motors.
Basic configuration: 12V ATV
[/SIZE][SIZE=10.5pt]Starter[/SIZE][SIZE=10pt] motor, handle, battery holder, solenoid, low voltage alarm wired ready for LIPO battery plus battery monitor. Also you can use starter with 12 V car or lawnmower batteries.
All ATV
[/SIZE][SIZE=10.5pt]starter[/SIZE][SIZE=10pt] motor was carefully tested and break in for 1-2 hours to lower unload current below 25 A
Using a solenoid to operate ~150 Amps current save push button from cooking. The low voltage alarm units connected to the battery will save the battery from deep discharging. The latest version has distributor boots (O'Reilly Auto Parts Part Number: CT512A) safety isolating all terminals.
[/SIZE]

[SIZE=10pt]The starter pulley designed to use 2L v-belt (recommended for gas motors) and popular sewing machine nylon belt for small nitro. I sell these [/SIZE][SIZE=10.5pt]starter[/SIZE][SIZE=10pt]s without battery and charger! [/SIZE][SIZE=12pt]100% satisfactions guarantee.[/SIZE]
[SIZE=10pt]Options:
Additional terminals - $2.00,
Overnight field charger for 3S LIPO battery - $10

This is a list of recommended Hobby King batteries you can order from USA warehouse.
N4500.3S.25 - Turnigy nano-tech 4500mah 3S 25~50C Lipo. The best, cheapest and can start ~100 times!
N5000.3S.25 - Turnigy nano-tech 5000mah 3S 25~50C Lipo.
N6000.3S.25 - Turnigy nano-tech 6000mah 3S 25~50C lipo.
T4500.3S.30F - Turnigy 4500mAh 3S2P 30C LiFePo4 Pack
Also, 2S battery can be used for 26 cc gas motors and nitro motors up to .91 size

All listed batteries have the same 4 mm terminals like wired
[/SIZE][SIZE=10.5pt]starter[/SIZE][SIZE=10pt].
The battery shipping price from US warehouse VIA priority mail $10-16.
The cost of basic configuration is $160 + shipping via FedEx Ground or priority USPS mail.
Shipping overseas cost ~ $75.
[/SIZE]

[SIZE=10pt]The few starters are ready to ship.
Please use this post to order. Thanks. Boris[/SIZE]

5 starters.jpg
 
Last edited by a moderator:
One starter sold to Dave Halverson. Tracking #9405 5118 99956 3172 4615 49. Boris
 
[SIZE=10pt]This is a most powerful and lightest [/SIZE][SIZE=10.5pt]cordless[/SIZE] [SIZE=10.5pt]Starter[/SIZE][SIZE=10pt] using 12 Volt battery for belt start GAS (up to 60cc) and Nitro (up to 1.2) motors.[/SIZE]

Basic configuration: 12V ATV [SIZE=10.5pt]Starter[/SIZE][SIZE=10pt] motor, handle, battery holder, solenoid, low voltage alarm wired ready for LIPO battery plus battery monitor. Also you can use starter with 12 V car or lawnmower batteries.[/SIZE]

All ATV [SIZE=10.5pt]starter[/SIZE][SIZE=10pt] motor was carefully tested and break in for 1-2 hours to lower unload current below 25 A[/SIZE]

Using a solenoid to operate ~150 Amps current save push button from cooking. The low voltage alarm units connected to the battery will save the battery from deep discharging. The latest version has distributor boots (O'Reilly Auto Parts Part Number: CT512A) safety isolating all terminals.

[SIZE=10pt]The starter pulley designed to use 2L v-belt (recommended for gas motors) and popular sewing machine nylon belt for small nitro. I sell these [/SIZE][SIZE=10.5pt]starter[/SIZE][SIZE=10pt]s without battery and charger! [/SIZE][SIZE=12pt]100% satisfactions guarantee.[/SIZE]

[SIZE=10pt]Options:[/SIZE]

Additional terminals - $2.00,

Overnight field charger for 3S LIPO battery - $10

This is a list of recommended Hobby King batteries you can order from USA warehouse.

N4500.3S.25 - Turnigy nano-tech 4500mah 3S 25~50C Lipo. The best, cheapest and can start ~100 times!

N5000.3S.25 - Turnigy nano-tech 5000mah 3S 25~50C Lipo.

N6000.3S.25 - Turnigy nano-tech 6000mah 3S 25~50C lipo.

T4500.3S.30F - Turnigy 4500mAh 3S2P 30C LiFePo4 Pack

Also, 2S battery can be used for 26 cc gas motors and nitro motors up to .91 size

All listed batteries have the same 4 mm terminals like wired [SIZE=10.5pt]starter[/SIZE][SIZE=10pt].[/SIZE]

The battery shipping price from US warehouse VIA priority mail $10-16.

The cost of basic configuration is $160 + shipping via FedEx Ground or priority USPS mail.

Shipping overseas cost ~ $75.

[SIZE=10pt]The few starters are ready to ship.[/SIZE]

Please use this post to order. Thanks. Boris
I still have four starters ready to ship. Please keep in mind: using a solenoid to operate ~150 Amps current save push button from cooking. This is only one starter at the market has a solenoid to operate! Boris
 
[SIZE=10pt]This is a most powerful and lightest [/SIZE][SIZE=10.5pt]cordless[/SIZE] [SIZE=10.5pt]Starter[/SIZE][SIZE=10pt] using 12 Volt battery for belt start GAS (up to 60cc) and Nitro (up to 1.2) motors.[/SIZE]

Basic configuration: 12V ATV [SIZE=10.5pt]Starter[/SIZE][SIZE=10pt] motor, handle, battery holder, solenoid, low voltage alarm wired ready for LIPO battery plus battery monitor. Also you can use starter with 12 V car or lawnmower batteries.[/SIZE]

All ATV [SIZE=10.5pt]starter[/SIZE][SIZE=10pt] motor was carefully tested and break in for 1-2 hours to lower unload current below 25 A[/SIZE]

Using a solenoid to operate ~150 Amps current save push button from cooking. The low voltage alarm units connected to the battery will save the battery from deep discharging. The latest version has distributor boots (O'Reilly Auto Parts Part Number: CT512A) safety isolating all terminals.

[SIZE=10pt]The starter pulley designed to use 2L v-belt (recommended for gas motors) and popular sewing machine nylon belt for small nitro. I sell these [/SIZE][SIZE=10.5pt]starter[/SIZE][SIZE=10pt]s without battery and charger! [/SIZE][SIZE=12pt]100% satisfactions guarantee.[/SIZE]

[SIZE=10pt]Options:[/SIZE]

Additional terminals - $2.00,

Overnight field charger for 3S LIPO battery - $10

This is a list of recommended Hobby King batteries you can order from USA warehouse.

N4500.3S.25 - Turnigy nano-tech 4500mah 3S 25~50C Lipo. The best, cheapest and can start ~100 times!

N5000.3S.25 - Turnigy nano-tech 5000mah 3S 25~50C Lipo.

N6000.3S.25 - Turnigy nano-tech 6000mah 3S 25~50C lipo.

T4500.3S.30F - Turnigy 4500mAh 3S2P 30C LiFePo4 Pack

Also, 2S battery can be used for 26 cc gas motors and nitro motors up to .91 size

All listed batteries have the same 4 mm terminals like wired [SIZE=10.5pt]starter[/SIZE][SIZE=10pt].[/SIZE]

The battery shipping price from US warehouse VIA priority mail $10-16.

The cost of basic configuration is $160 + shipping via FedEx Ground or priority USPS mail.

Shipping overseas cost ~ $75.

[SIZE=10pt]The few starters are ready to ship.[/SIZE]

Please use this post to order. Thanks. Boris
I still have four starters ready to ship. Please keep in mind: using a solenoid to operate ~150 Amps current save push button from cooking. This is only one starter at the market has a solenoid to operate! Boris
For a limited time I can supply starters with the battery tester and low voltage alarm in one unit. Boris
 
[SIZE=10pt]This is a most powerful and lightest [/SIZE][SIZE=10.5pt]cordless[/SIZE] [SIZE=10.5pt]Starter[/SIZE][SIZE=10pt] using 12 Volt battery for belt start GAS (up to 60cc) and Nitro (up to 1.2) motors.[/SIZE]

Basic configuration: 12V ATV [SIZE=10.5pt]Starter[/SIZE][SIZE=10pt] motor, handle, battery holder, solenoid, low voltage alarm wired ready for LIPO battery plus battery monitor. Also you can use starter with 12 V car or lawnmower batteries.[/SIZE]

All ATV [SIZE=10.5pt]starter[/SIZE][SIZE=10pt] motor was carefully tested and break in for 1-2 hours to lower unload current below 25 A[/SIZE]

Using a solenoid to operate ~150 Amps current save push button from cooking. The low voltage alarm units connected to the battery will save the battery from deep discharging. The latest version has distributor boots (O'Reilly Auto Parts Part Number: CT512A) safety isolating all terminals.

[SIZE=10pt]The starter pulley designed to use 2L v-belt (recommended for gas motors) and popular sewing machine nylon belt for small nitro. I sell these [/SIZE][SIZE=10.5pt]starter[/SIZE][SIZE=10pt]s without battery and charger! [/SIZE][SIZE=12pt]100% satisfactions guarantee.[/SIZE]

[SIZE=10pt]Options:[/SIZE]

Additional terminals - $2.00,

Overnight field charger for 3S LIPO battery - $10

This is a list of recommended Hobby King batteries you can order from USA warehouse.

N4500.3S.25 - Turnigy nano-tech 4500mah 3S 25~50C Lipo. The best, cheapest and can start ~100 times!

N5000.3S.25 - Turnigy nano-tech 5000mah 3S 25~50C Lipo.

N6000.3S.25 - Turnigy nano-tech 6000mah 3S 25~50C lipo.

T4500.3S.30F - Turnigy 4500mAh 3S2P 30C LiFePo4 Pack

Also, 2S battery can be used for 26 cc gas motors and nitro motors up to .91 size

All listed batteries have the same 4 mm terminals like wired [SIZE=10.5pt]starter[/SIZE][SIZE=10pt].[/SIZE]

The battery shipping price from US warehouse VIA priority mail $10-16.

The cost of basic configuration is $160 + shipping via FedEx Ground or priority USPS mail.

Shipping overseas cost ~ $75.

[SIZE=10pt]The few starters are ready to ship.[/SIZE]

Please use this post to order. Thanks. Boris
By customer request, I made universal in/outboard
starter
with reverse attachment as you see it in the picture. I can make a few more by request. The price is $175 + shipping. The no risk - you can return
starter
in 30 days to get refund. Thanks. Boris
BTW: you have to hold
starter
upside down to start outboard motor.
Universal in-out board.jpg
 
Last edited by a moderator:
Hi Boris,

I have your flow meter and now I would like to order a starter with the outboard attachment. It will be shipped to 47715.

Thanks

Dan
 
Last edited by a moderator:
Hi Boris,

I have your flow meter and now I would like to order a starter with the outboard attachment. It will be shipped to 47715.

Thanks

Dan
Hi, Dan! The cost of starter is $175 + $15 shipping. I can ship it on Friday. Boris
 
Boris,

I am thinking about hooking my starter to my motorcycle batteries. I run out of juice with my 4500lipo by midday. Battery might not be in good shape??

I have had 2-12v motorcycle batteries in series for 24 volt with my other starter.

Should I put in parallel for 12 volt for your starter? Or just use one 12v motorcycle battery? Can your starter take 24volts?

I bought the starter from you last summer . Buying another lipo is my other option too.

Thanks,

Duke
 
Last edited by a moderator:
Boris,

I am thinking about hooking my starter to my motorcycle batteries. I run out of juice with my 4500lipo by midday. Battery might not be in good shape??

I have had 2-12v motorcycle batteries in series for 24 volt with my other starter.

Should I put in parallel for 12 volt for your starter? Or just use one 12v motorcycle battery? Can your starter take 24volts?

I bought the starter from you last summer . Buying another lipo is my other option too.

Thanks,

Duke
Hi, Duke! You have to use only 12 V battery. You can put batteries in parallel. But, please check and carefully charge your Lipo. Do you use balance charger? Connect the battery monitor and recheck the battery. Fully charged battery should have 4.2+-.1 V. If not, call me 901 233-6110. Thanks. Boris.

BTW: If you can send me the starter and battery, I'll be glad inspect them with no charge. Boris
 
Duke. I use a 5000 3s and me and jerry can use it 1.5 days on a charge. That's a lot of boats so it must be your batt or charger.
 
Usually, I recommend having 2 4000 mAh battery instead one 5-6000 mAh. Boris
 
Boris,

I'll be running nitro boats under .91 (45 and 35). I ordered one Turnigy 5000 2S 25-50 to see how it will start the boats. I will probably purchase another 5000 2S or maybe a 3S. What's your recommendation?

Thanks

Dan
 

Latest posts

Back
Top