Cees van der Velden F1 Power boat

Intlwaters

Help Support Intlwaters:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Jan Ilmer

Well-Known Member
Joined
Feb 17, 2013
Messages
71
Time for a new project

A Cees van der Velden F1 catamaran boat from the 70's

have the boat modeled of old photos

IMG-20161209-WA0035.jpg

IMG-20170122-WA0023.jpg

And the info I got from the driver of the number 15 boat

The bottom I have to due for a scale model

The 3d drawing

22-03-2017-03.jpg

22-03-2017-01.jpg

17-01-2017-03.jpg

The milled plywood

IMG-20170121-WA0005.jpeg

IMG-20170121-WA0012.jpeg

IMG-20170121-WA0017.jpeg

IMG-20170121-WA0020.jpeg

IMG-20170121-WA0022.jpeg

ready to go build
 
The construction of the model

IMG-20170122-WA0001.jpeg

IMG-20170124-WA0011.jpeg

IMG-20170124-WA0013.jpeg

IMG-20170126-WA0007.jpeg

IMG-20170126-WA0009.jpeg

IMG-20170126-WA0016.jpeg

IMG-20170126-WA0020.jpg

IMG-20170126-WA0029.jpeg

IMG-20170126-WA0045.jpg

IMG-20170126-WA0049.jpeg

IMG-20170126-WA0062.jpeg

IMG-20170127-WA0003.jpeg

IMG-20170127-WA0005.jpeg

Yes bob I sell that as a construction kit with the polyester hood
 
Last edited by a moderator:
How long is the boat and what is the cost Jan? Mike
 
Last edited by a moderator:
the sizes

maten.JPG

I have 1 of the first 6 TFL outboard motor's with a gear to test

IMG-20161220-WA0028.jpg

looks good

IMG-20161228-WA0008.jpeg

IMG-20161228-WA0010.jpeg

the new Johnson V8 hood

IMG-20170202-WA0023.jpeg

20170218_142656.jpg

DSC05380.JPG

IMG-20170210-WA0031.jpeg

the stickers ready to print

IMG-20170728-WA0027.jpeg
 
again a bit further

IMG-20170128-WA0003.jpeg

IMG-20170128-WA0007.jpeg

IMG-20170128-WA0014.jpeg

IMG-20170210-WA0016.jpeg

IMG-20170221-WA0016.jpeg

IMG-20170224-WA0003.jpg

IMG-20170304-WA0002.jpeg

I have a 3D print of mine self as driver

IMG-20170204-WA0049.jpeg

and the plug of the hood is also machined

IMG-20170204-WA0015.jpeg

gr jan
 
He is doing very well, steers well

The TFL gear test engine also runs well on 3S

have to look for the right propeller

[Video]

[/Video]
 
That is a very scale looking tunnel I know a lot of people will love it just because of the looks. Do you have any rougher water that it will ride in to show the difference
 
Thats an awesome job you did there....Cees...my favourite...

Prachtig gedaan Jan, petje af. Ben altijd fan van hem geweest.
 
Back
Top