BobBonahoom
Well-Known Member
- Joined
- Mar 6, 2009
- Messages
- 532
SOLD 8/3/14
PRICE REDUCED TO $300
This is a Firefighter Gas rigger with all hardware, radio gear, servos, etc. This hull is set up for a Quickdraw Pioneer engine in an Accutech mount. There is also a servo actuated kill switch mounted in the box.
The only things required to get the boat into the water are: engine, collet, fuel bag & tubbing, receiver battery and prop.
The boat is new and never been run. (I was at one time planning to run it on nitro and thus the F-Hydro decal on the cowl). The bottom is re-enforced with carbon fiber.
Paint is PPG 3 stage pearl (purple), PPG Omni (white), and PPG DCU-2021 clear over all.
Price is $300 plus buyer pays for shipping. Payment by Pay Pal is required prior to shipment.
FF gas costing.pdf
PRICE REDUCED TO $300
This is a Firefighter Gas rigger with all hardware, radio gear, servos, etc. This hull is set up for a Quickdraw Pioneer engine in an Accutech mount. There is also a servo actuated kill switch mounted in the box.
The only things required to get the boat into the water are: engine, collet, fuel bag & tubbing, receiver battery and prop.
The boat is new and never been run. (I was at one time planning to run it on nitro and thus the F-Hydro decal on the cowl). The bottom is re-enforced with carbon fiber.
Paint is PPG 3 stage pearl (purple), PPG Omni (white), and PPG DCU-2021 clear over all.
Price is $300 plus buyer pays for shipping. Payment by Pay Pal is required prior to shipment.
FF gas costing.pdf
Attachments
Last edited by a moderator: