.12 motor

Pond Player · Apr 12, 2002

I can't break it in...its just not sucking any gas....my arm wears out and then I just quit. the plug is good and it will fire if you put nitro in the motor, but it just wont suck it from the tank...any ideas? or maybe I need a how too? I believe I have everything set correctly I have it turned out to 2 1/2 - 3 turns on the high speed jet.....but I dunno? Please help me out cuz the ICE IS MELTING!!!! and No boats on the water its perfect time! and I just wanna hit the H2O....thanks

TimD · Apr 12, 2002

Firstly, what motor is it and do you have a muffler or tuned pipe on it supplying tank pressure.

Have you removed the needle from the carb and blown air into the pressure line into the tank to see if it forces fuel thru the needle housing? This should be a good starting point to establish the fuel feed is working properly...

When the needle is back in, try putting your finger over the exhaust outlet while cranking it over. This should force more fuel into the carb as a prime.

.12 motor

Help Support Intlwaters:

Pond Player

Active Member

TimD

Well-Known Member

Similar threads

Latest posts

.12 motor

Help Support Intlwaters:

Pond Player

Active Member

TimD

Well-Known Member

Similar threads

Latest posts

Join the conversation!

Join today and get all the highlights of this community direct to your inbox. It's FREE!