Jump to content



Help Support IntlWaters by donating using the link above.
Photo

Jae 21 G2


  • Please log in to reply
14 replies to this topic

#1 Tom David

Tom David

    Boater

  • Members
  • PipPip
  • 305 posts

Posted 09 April 2018 - 09:29 PM

New project

21 G2 Lite

Attached Files


Edited by Tom David, 09 April 2018 - 09:39 PM.


#2 mike walker

mike walker

    Boater

  • Members
  • PipPip
  • 429 posts

Posted 09 April 2018 - 09:39 PM

Looks like some one has a plan. Nice





#3 Tom David

Tom David

    Boater

  • Members
  • PipPip
  • 305 posts

Posted 09 April 2018 - 09:46 PM

Looks like some one has a plan. Nice


Thanks Mike, I’ll let you know how that ski design works out.
Hope to have in the water soon.

Tom

#4 shoboat

shoboat

    World Racer

  • Members
  • PipPipPipPipPip
  • 6,635 posts

Posted 10 April 2018 - 07:59 AM

Tom,

 

Try G-10 for the ride surface. You can test it quickly and make thickness changes if needed to?

You may want a longer tub length next? Add the bait box, it will give you a better ride.

On our 12-JAE's we just solder a piece of brass shim stock to the bottom of the stuffing tube.

No sides needed at all. Lots to think about with "Flat Plane Technology". I have a few other ideas

if you are interested. We built a few new boats over the winter with some other good ideas.

 

Thanks,

 

Mark Sholund

231-590-3023



#5 Bradley Maglinger

Bradley Maglinger

    Club Racer

  • Members
  • PipPipPip
  • 968 posts

Posted 10 April 2018 - 11:22 AM

Cant wait to see the finished project.  Are looking to heat race? or time trial with it?  or both?  Either way you always have stellar builds



#6 Butch Londrigan

Butch Londrigan

    Club Racer

  • Members
  • PipPipPip
  • 885 posts

Posted 10 April 2018 - 03:54 PM

Looks great Tom. Keep us posted on how she runs.

#7 Geraghty

Geraghty

    National Racer

  • Members
  • PipPipPipPip
  • 1,287 posts

Posted 10 April 2018 - 04:50 PM

 

Looks like some one has a plan. Nice


Thanks Mike, I’ll let you know how that ski design works out.
Hope to have in the water soon.

Tom

 

 

That's cool....Keep innovating ......That's what it is all about......building , not just buying.......

Rod Geraghty
 



#8 SayMikey

SayMikey

    World Racer

  • Members
  • PipPipPipPipPip
  • 10,772 posts

Posted 10 April 2018 - 05:10 PM

Tom,

 

Try G-10 for the ride surface. You can test it quickly and make thickness changes if needed to?

You may want a longer tub length next? Add the bait box, it will give you a better ride.

On our 12-JAE's we just solder a piece of brass shim stock to the bottom of the stuffing tube.

No sides needed at all. Lots to think about with "Flat Plane Technology". I have a few other ideas

if you are interested. We built a few new boats over the winter with some other good ideas.

 

Thanks,

 

Mark Sholund

231-590-3023   Tommy I have g10 if you need some



#9 Tom David

Tom David

    Boater

  • Members
  • PipPip
  • 305 posts

Posted 10 April 2018 - 06:22 PM

Thanks everyone.

I stared this project to build a lite hydro for oval record trials. Im a big fan of the G2 for a lite build. Will let everyone know how the testing goes on this build. Want to thank Joe at Zippkits for the suport.

Mark, l am very much aware of the longer hull, but I am changing a couple of areas on the G2, staying lite for oval record trials.

Edited by Tom David, 10 April 2018 - 06:38 PM.


#10 Tom David

Tom David

    Boater

  • Members
  • PipPip
  • 305 posts

Posted 29 April 2018 - 10:34 AM

Finally test day

Attached Files



#11 BrianNeumann

BrianNeumann

    Beginner Boater

  • Members
  • Pip
  • 185 posts

Posted 29 April 2018 - 09:19 PM

Is that green paint or vinyl you used? Also where did you get the jae logos?

#12 Tom David

Tom David

    Boater

  • Members
  • PipPip
  • 305 posts

Posted 30 April 2018 - 03:01 PM

Is that green paint or vinyl you used? Also where did you get the jae logos?

I Design my graphics on B&D Graphixs web site
http://www.bandegrap...ing/design-now/
The JAE logo was done in Bauer Script/ Neon Green
Their vinyl is top of the line.

I use Hanger 9 trim sheets from Horizon Hobby
Search for ultra Kote trim florescent lime.
The trim sheets from Hanger 9 out perform Monkote trim.
Holds up to high nitro and is easier to work with.
The fluorescent lime matched neon green from B&D.

I Dont remember which font I used for Zippkits.com.
But you can experiment with their software.
B&D are great people to work with on any project 👍

Edited by Tom David, 30 April 2018 - 05:00 PM.


#13 Tom David

Tom David

    Boater

  • Members
  • PipPip
  • 305 posts

Posted 30 April 2018 - 06:23 PM

https://m.youtube.co...h?v=jv5pGBTyHPA

#14 mike walker

mike walker

    Boater

  • Members
  • PipPip
  • 429 posts

Posted 30 April 2018 - 09:09 PM

very nice. You may want to use 10% fuel and put some lead in the nose so some of us can keep up. lol

nice work.



#15 BrianNeumann

BrianNeumann

    Beginner Boater

  • Members
  • Pip
  • 185 posts

Posted 30 April 2018 - 10:15 PM

Thanks for the detailed response! I used the monokote lime green on the sides of my sponsons over a clearcoat instead of painting them green, and I really like how it turned out. So far it hasn't been affected by 60% nitro or water after 2 seasons. But now I will try the hanger 9 on my next set out of curiosity. I appreciate the info. Your boat looks great and is running really nice in the video!

Brian