user 21992
Well-Known Member
- Joined
- Dec 17, 2015
- Messages
- 163
Well, been working on the Lobster Cowl Plug petty steady and all most done. Will be making a few final tweaks like the windshield frame impression, making it ease to cut out for the plexiglass like the front scoop, rear engine cover vents and Turbine pipe cover. Started sealing the wood and getting it ready to do the final smoothing out and then off to the bodyman for the final filler primer and more finessing and then final paint. the side Air Ram Intake covers will be added later to accommodate the custom header pipe and carb. they will faceed forward and have screens in front.
The mold hopefully is going to be made by a local fiberglass company that I've done work for before ( wrong time of the year and very busy ) and want's to look at first.
This will be my final post on the Lobster Cowl Plug Cowl till it's on the boat, in the meantime it's back to finis skinning the hull and installing the hardware,
I surely hope this has been an informative post and of some encouragement to all, building style may not be the best, but I'm old school and make due with what have on hand.
Boy where does the time go!!!!!!!!!!!!!!! Happy Racing!!!!!!!!!!
The mold hopefully is going to be made by a local fiberglass company that I've done work for before ( wrong time of the year and very busy ) and want's to look at first.
This will be my final post on the Lobster Cowl Plug Cowl till it's on the boat, in the meantime it's back to finis skinning the hull and installing the hardware,
I surely hope this has been an informative post and of some encouragement to all, building style may not be the best, but I'm old school and make due with what have on hand.
Boy where does the time go!!!!!!!!!!!!!!! Happy Racing!!!!!!!!!!
Last edited by a moderator: