Need a little prop help for a zippkit pro vee

Intlwaters

Help Support Intlwaters:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

SJWhitcraft

Member
Joined
Nov 11, 2006
Messages
12
I built a zipp kit pro vee this winter and put a gizmo 30 plus motor I tried some props 275prather 7014 and a couple other prop

boat runs great but has alot of rpm needs more prop need some help from some mono guys
 
Joe's been getting low 60's with a 2816/2. I've got one to try when I get mine wet. I bolted on a 7016/3 when I put it together but then again I bolted on a few others. The prop was fast on my F-41 Cat.
 
Last edited by a moderator:
Thank Joe for that one, I just passed it along from Jim's RC Boat Dock. If that one isn't enough I've got a 2916 also. On my other mono a 2714/3 or -4 is working quite well. The 4-blade is giving me a better hole-shot and a flatter roostertail and I haven't seen any loss in speed.

A 7016/3 is usually a good go-to prop as a starting place or a 2716.
 
Back
Top