Jump to content



Help Support IntlWaters by donating using the link above.
Photo

MLBOATWORKS 380 RIGGER


  • Please log in to reply
3 replies to this topic

#1 MarkF

MarkF

    Newbie

  • Members
  • Pip
  • 37 posts

Posted 07 January 2018 - 01:11 AM

I started this kit 2 weeks ago and made some progress on it. It's ready for the electronics now. This is a 6s rigger running 2 6s 5000 packs and a TP 1470 1520kv motor.I will start with a ABC 2215 prop done up by Brian B. I should have it ready to hit the water by next weekend.

 

Mark 



Attached Files



#2 darryl whitman

darryl whitman

    Boater

  • Members
  • PipPip
  • 254 posts

Posted 29 January 2018 - 02:59 PM

Nice job Mark, so Y did you go with a 1520Kv .? instead of an 1440Kv motor, 





#3 MarkF

MarkF

    Newbie

  • Members
  • Pip
  • 37 posts

Posted 10 February 2018 - 12:27 AM

The 1520 works very good with the ABC 2215 prop without getting hot. The boat is close to 80 mph and working very well. My friend was running the 1650 motor and the boat was very fast but was pulling to many amps so we went down a notch and I think I found the sweet spot for Q rigger. Also the boat is working so  good I bought another. You will not be sorry if looking for a Q rigger. 

 

Mark


Edited by MarkF, 10 February 2018 - 12:28 AM.


#4 TREVOR JENSEN

TREVOR JENSEN

    Newbie

  • Members
  • Pip
  • 14 posts

Posted 13 February 2018 - 09:11 PM

Hi Mark,

 

Any chance of some pics of the finished rigger showing the inside and outside of it please.

 

Thanks

Trevor