Flow Meter GEN-4 update

Intlwaters

Help Support Intlwaters:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

bmazor

Well-Known Member
Joined
Mar 11, 2011
Messages
959
I decide to make some improvement to my latest two air pump flow meter GEN-4.

Originally this model made for maximum airflow to tune up big nitro motors. The flow meter is accurate when reading numbers 25-120. Unfortunately for motors .12-.2 the reading rich over 200. In this case air pump starts deliver hot air and change reading during measurement.

I will give boaters opportunity to switch flow meter to one pump mode. It will bring small motor reading below 120, make flow meter more accurate!

All older version of GEN-4 can be updated. Boris

one pump.JPG

two pump.JPG
 
I'm ready to have my meter updated! Can you send me price and where to ship or is it something I can do myself?
 
Dear friends! I can send wired connectors ($6 shipped) and you can install them itself. Also you can use any pair of connectors and any flexible wire. Goog Luck. Boris

upgrade.JPG
 
Thanks for what you do Boris. It is awesome to be in a hobby where people still take a lot of pride in doing a great job. Despite not making much money at it!!! There are many but thank you Boris.
 
Beginning of Dec, 2014 all GEN-4M flow meter will have additional switch to run ONE or TWO air pump. I'll not increase price in 2014. Boris

GEN-4M pic.jpg
 
Back
Top