marty slaters 67 hydro

Intlwaters

Help Support Intlwaters:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

James montgomery

Well-Known Member
Joined
Jun 12, 2012
Messages
1,054
marty came with his new 67 canard today nice looking boat, has a 67 k@b in it not sure of pipe or prop .....maybe marty can chime in:):):)forgot to ask made some laps and got better as the day went on here is a couple of pics of it....nice looking hydro marty:)....i have video of it running to will get that posted tmrw......
 
your welcome marty:) i do have video of the frist run....tryed to upload but cant upload video from phone so will have to go and use the wifes tablet to upload
 
The boat ran very well... ... we have the ride attitude spot on and it didnt show any quirks, turning or anything... after numerous pipe adjustments we're looking for the top end yet... Marty has had the resurrection of this thing from a mangled bank arrow mess to doing test laps and its been a long journey... great job!... we'll continue to bring the hull into shape as best we can... theres a video around, and input per you canard guys is welcome.... thanks....
 
still cant load video from wifes tablet.... do i need to use youtube? if i xant get to upload ill take some pics of it next weekend on the water:):)
 
Last edited by a moderator:
went back out today

I think I was using a 40 pipe[ that's what was on it] they said got a 60 pipe from Mike big difference

an it was smoking today till the coupler let go will have to park it for awhile

got to get me a better set up for it

did K B make an angled water cooled header for there 67

or what would you guys suggest ya I know get a real motor

Marty
 
If you decide to get a different motor I suggest cmb green head, had one in our scale canard and it is a beast!

I can't remember if k&b made an angled one.
 
Last edited by a moderator:
Marty I used to run a K&B 67 but always switched to an exhaust throttle which was angled and water cooled you might want to try that route
 
Marty,

As I recall K&B made 1 or 2 angled exhaust adaptors for the 67/82 water cooled headers, I had one on mine years ago. You might try Gary Preusse 630-279-2451.

Wallster
 
Thanks guys for the come back

Bradley set ya my Email add strut depth flat on the table 1 piece of 1/8 ply under rear sponsons.

John thanks I will have to find some more couplers but will be looking for you to come an visit

make Shure an bring a car load of toy boats to play with!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

George hopping to stay with a carb set up but will keep that in mind

Wally what can I say .... but cant wait for the WASHED UP HAZZZ BEEN COME BACK TOUR

I will have to post it on the for sale section but do you think a header will fit

both a 67 and a 82 same thing ?
 
Back
Top