Servo power

Intlwaters

Help Support Intlwaters:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

seaducerpete

Well-Known Member
Supporting Member
Joined
Jun 20, 2008
Messages
1,754
How do you know if a servo is under powered or not I have a 62 oz at 6 volt servo on my Zenaida carb linkage is not binding but the servo buzzes at full throttle it is a didital servo
 
If your carb has a hard stop and your up against it it will buzz and wipe out your servo, back off the end point a little. If you arent against a hard stop and its a digital servo its normal for them to buzz.

Thanks John
 
Back
Top